what pony power

[turbotink]

would i be looking at after

a full wgt rebuild
ported
s/s manifold
hks twin induction system
induction hard pipes
decat straight through mid pipe
blitz catback exhaust
full apexi pfc and commander
and a hks ssbov if it makes a diffrence.

id imagine pip wont dyno it till i have the car ran in at 1k so just wondering what id be looking around for power with the current mods on the car.

then ill have a toy over winter.

cheers for all advice upfront

[Ricco_04]

Not sure what extra the porting will give you but with filters, PFC, and full exhaust you should see approx 330FWBHP.

[dandan]

300 at the wheels if your fuelling can keep up i reckon

[shaunwil]

On pips dyno i would say probably about 280bhp At the Hub, if your on stock fueling.

Shaun

[TRex]

Add these to your list..
 1. Big Aftermarket Downpipe
 2. Boost controller
 3. Adjustable Fuel Pressure reg. (or 1200/1300cc secondary injectors)

 Then Pip should get you an easy and safe 300 at the Hubs after the first 1K of mileage!

 Re-mapp after 3K miles for more if required.....

[Rixio]

Id say 280-290atw

My injectors are maxing at 6300rpm and im 300ish with more mods

[sadgoth]

I\'t say it depends on the severity of the porting, if you are talking a small street port you\'d be looking at less than a bridge or monster port!

[cjr]

what turbo since you say s/s manifold?

[turbotink]

im just running on stock twins.the manifolds not fitted yet......or does that mean it wont lol