Help in identification of ecu please??

[rextreme]

You can email border directly and get the info on that ecu,

main@border-racing.com

They have an english speaking specialist.
Cant remember the guys name.
But I spoke to him about a clutch once.

http://border-racing.com/border-index.html

They have just updated their web page too.

Russ.

[Donato]

I have emailed them, thanks.

[20B_boy]

Originally posted by Donato
Even at low boost according to the fuel mixture gauge it is rich, but i will get it checked out.

Those gauge A/F metres are practically useless mate, dont rely on them in the slightest. If the RE-Amemiya ECU that came on my \'96 is any thing to go by your Border computer (if it IS a Border computer!) IS probably running rich, BUT - as Dave said - get it to some one with a proper wide band lambda sensor to check it out before u do damage to be safe.

[Robertio]

Donato, if you take the car out to The Garage Marc has a wideband kicking around that can be hooked up.  The other option is to pop into Dastek and ask Gerry if he can do a couple of runs on their rollers to check your fueling at different boosts (probably cost you 40 quid though)  Failing that I\'ll hopefully have mine at the RR Day so if required should be able to hook it up to your car and see what boost you are safe (AFR wise) running at before going on the rollers.

[Donato]

Cheers Robbie,

I will be popping in to see marc in the next week (if i have the time!!).
If you could do that at the RR day that be much appreciated, i was beginning to get worried about my engine blowing up on the rollers!!:o

See you feb 1st!