My Purchase from D\'sign Studio

[andyrose]

Purchased early this week a stick on front number plate from Jono @ D\'sign Studio. arrived yesterday, packed and with clear instructions.
10 mins later its on the car, looking lurvley.
I going for a run over the weekend with the existing plate on (part blocking my intercooler) my Mazdaspeed A spec frontsplitter. will measure air intake temps. then i take it off and measure again, should see a drop of a few degrees C.
will post results next week with a pic or two
Cheers Jono (your a top man)

[allstaruk]

With a stock engine your barely going to see any difference from removing the numberplate I\'m afraid, I\'ve got an a-spec bumper and I took the plate off for a coupld of months last year and it barely changed, you will find that when youd cars got very hot in traffic etc the temps will drop quicker.

Al

[andyrose]

tbh anything would be better than what i\'ve got atm
its quite normal for me to see Air inlet temps of 30°C on a motorway run.
when i give some large it can shoot to 40°+ (been told to be v.careful with the right foot if over 35°C) heat soak in standing traffic is a nightmare, can take 2 miles @ 70mph before it drops from high 50°C back to sub 30°C
(Whilst i\'m waiting for it to drop all my mates have left me in a cloud of dust & exhaust fumes)
My HKS induction kit doesn\'t help, drawing hot air in from under the bonnet!
time to get my scissors and cardboard out, i feel a ducting job coming up for the weekend.
Got an ARC intercooler with ducting on its way so hopefully that should help some more.

[davegttph1]

mid 30\'s is my average temp I see on the intake. any sort of sustained right foot action and Im in the 40\'s reasonably quickly. Not sure what I plan on doing other than WI to combat it.

[Jono FD3]

Purchased early this week a stick on front number plate from Jono @ D\'sign Studio. arrived yesterday, packed and with clear instructions.
10 mins later its on the car, looking lurvley.
I going for a run over the weekend with the existing plate on (part blocking my intercooler) my Mazdaspeed A spec frontsplitter. will measure air intake temps. then i take it off and measure again, should see a drop of a few degrees C.
will post results next week with a pic or two
Cheers Jono (your a top man)

Glad it all went to plan for you andy.

Any chance you could put a note in my feed back section? Just to show people what my work is like, if im efficient, etc.!!

Cheers mate
Jono

[andyrose]

Jono,
just tried to post positive feedback but as i\'m not a member its locking me out.
feel free to quote my original post that started this thread.
Andy
I\'ve posted links to your company on a few other forums that i frequent every now and then.

[Jono FD3]

Nice one mate,
Thanks very much,
Jono

[Jonathan_F]

Purchased early this week a stick on front number plate from Jono @ D\'sign Studio. arrived yesterday, packed and with clear instructions.
10 mins later its on the car, looking lurvley.
I going for a run over the weekend with the existing plate on (part blocking my intercooler) my Mazdaspeed A spec frontsplitter. will measure air intake temps. then i take it off and measure again, should see a drop of a few degrees C.
will post results next week with a pic or two
Cheers Jono (your a top man)

Hi Andy,

How much was the plate and is it legal (reflective backing)?

Cheers,
Jon

[Jono FD3]

Hi Andy,

How much was the plate and is it legal (reflective backing)?

Cheers,
Jon

Answwer to your questions:

£12 deliverd
Yes
And Yes!!!

Hope this helps jon, Just click the link at the top or take a look at my traders post!!

Jono