newbie type r

Started by fast!!!, April 03, 2006, 09:28:51 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

fast!!!

hi there i\'m new here,i was driving an fto but decided to go back to mazda have been driving mazda\'s for years mainly 626\'s. anyway hit the midlife crisis point and bought an fto( beautifull car)
anyway saw an rx7 one day and thought thats my next car,so here i am with a 93 type r efina sat on the drive.
jesus christ! its like riding in a rocket.

i have a question is it safe to fit a dump valve and where is the best place to get one,
oh and no doubt i will become a full member in the near future
thanks
ps go easy on me complete green horn on rotary engine\'s

AndyGen3

Hi mate and welcome :Thumbsup!

And yea u can fit a dumpvalve no bother... Try lookin on ebay there might be replacement pipes with the dumpvalve already welded on...

What spec and mods do u have?? Throw up sum pics if u have them too....

And happy posting...

Andy :)

fast!!!

dont really know much about the car yet still a bit green,i know its a light weight version with no rear seats its got koenig wheels with big wide tyres on the rear i think they are 255/40/17 still spin easy though,no mods except for the exhaust

Rich Cheung

Like you I came from FTO land onto Rex ownership.
Welcome to the club matey.

Rich  :wave
Phasen sehnen sich das Hoff
長くHoff は住んでいる

dj_dee99

Hello & welcome!

Any pics?

fast!!!

no pics yet i will get some sorted at the weekend,
does any body know which type of dump valve i need? will a bailey one be ok?
thanks

BlitzBoy

The FD rx7 comes with a standard type dump valve if you want to hear it all you need is to remove the standard Airbox and fit an Induction kit then the standard valve will dump to air instead of into the airbox
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Warthog

Welcome mate to the world of speed. :InLove

This may seem a silly question to ask you but why do you need to pay out good money to fit a D.V. -- when you already have two fitted to your system .?????

Hit boost and come off and you will hear them dumping. You will not gain anything from fitting a bling one except a louder swissssssssssssss.

Save your hard earned cash and have an APEXI PFC & Commander ECU fitted and have it tuned then you will feel her fly. You are also safe then to start doing mods as you will have a mapable ECU which will keep your A/F ( air/fuel ) ratio in the safe zone.

Not trying to have a pop or anything mate just trying to save you money to spend on mods that will give you Speed and power. And a very big GRINNNN. :burnout
I\'M ALWAYS IN THE SH*T IT\'S JUST THE DEPTH THAT MAY VARY.

Project Evil seven.:evillaugh

RE:WORX---13b RE engine, Motec M400 Pro ECU, Os Giken 5 speed internals-Gearbox, HKS T51R KAI turbo, With 575 @ Fly, 487.9 @ Wheels @ 1.3bar 420 ftlbs, on PUMP FUEL Sheel V-Power. BUILT & TUNED BY RE:WORX. More work planned..:InLove

REW, Stock Twins, RE:WORX-- British Record, 389.2 @ Wheels -- 03/09/2005.

fast!!!

thats a bit of good news are they the little brown gizmo\'s connected to the pipes that are about an inch in diameter,
dont know if i want to mod the car at the moment it feels bloody fast as it is.
the back wheels spin up easily with no effort as it is :burnout .can believe this thing is so fast just from two triangles spinning around.
cant see the back tyres lasting to long  :D
the mechanic i use races one of these, the model before he has had a look at it and says is the dogs danglers alloy suspension bits and pieces bit fat exhaust,massive brakes.
i used to ride a yamaha v-max 1200 155 bhp that was bloody fast! this car feels as fast if not faster!
starting to realise why chavs jaws drop when i pass them  :driving  :D
should have got one of these years ago :Thumbsup!

Rixio

Welcome to the forum :)

Did you get the car from Japan or from here? If the former be carefull with the tyres if they are jap because they wont be accustomed to our lovely British weather :)


Carefull of that back end now ;)

Rixio

Warthog

Yes they are those brown things. :mmmm

If you are not going to play with the engine, then for road holding change your anti-roll bars front and back to the Racing Beat set up. The front set up comes with an additional brace bracket about £320.00 the lot from RE:WORX ( vendor above ). I put off doing it for some time and I wish I had done it years ago, the handling in corners is the dogs. It takes a lot to impress me, but I must say it is a fantastic mod. HTH.
I\'M ALWAYS IN THE SH*T IT\'S JUST THE DEPTH THAT MAY VARY.

Project Evil seven.:evillaugh

RE:WORX---13b RE engine, Motec M400 Pro ECU, Os Giken 5 speed internals-Gearbox, HKS T51R KAI turbo, With 575 @ Fly, 487.9 @ Wheels @ 1.3bar 420 ftlbs, on PUMP FUEL Sheel V-Power. BUILT & TUNED BY RE:WORX. More work planned..:InLove

REW, Stock Twins, RE:WORX-- British Record, 389.2 @ Wheels -- 03/09/2005.

fast!!!

#11
the car came into the country from japan in november, the tires are yokohamas fronts are good but the back one\'s arn\'t going to last to much longer with the power it puts out :cool
also wondering why there are no rear speakers in the car,been looking around trying to find the right size to buy,
the mesh things are there but no speakers behind them.wondering if somebody stole them somewhere along the line :xconfused

shaunwil

I too came from the FTO, i had an auto GPX. I thought that was a quick car until i got my rx7. They are fantastic cars, just take it easy in the wet and your laughing. The driving feeling is awesome !

If you go for most of the aftermarket bolt on filters the standard blowoff valves are nice an loud !

Enjoy, and welcome !

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

gsb876

Quote from: fast!!!the car came into the country from japan in november, the tires are yokohamas fronts are good but the back one\'s arn\'t going to last to much longer with the power it puts out :cool
also wondering why there are no rear speakers in the car,been looking around trying to find the right size to buy,
the mesh things are there but no speakers behind them.wondering if somebody stole them somewhere along the line :xconfused

Nah they are not there, i thought that with my first rx but its just for show no speakers, although decent space to get some 6x9\'s fitted  :cool

Welcome to the club matey
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle

fast!!!

#14
thanks for all the replies people you have saved me some money already i\'m gratefull for that,
i going to get my ice sorted first going to get some speakers first,then something for induction, are induction kits plug and play or do i need to make adjusments?
thanks ps are these any good?
http://cgi.ebay.co.uk/85-97-Mazda-MX3-MX5-MX6-RX7-Air-Induction-Kit_W0QQitemZ8052306632QQcategoryZ36680QQssPageNameZWDVWQQrdZ1QQcmdZViewItem