Chattering

Started by JapSam, January 19, 2006, 08:16:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

JapSam

Which are the best air filters to get an rex fluttering like a cossie when letting off.
Do rx7s run recirc dvs as standard ? where abouts are they, has anyone else done this on an rx7 ?

Thanks
Sam

asp

there are 2 bov\'s on a fd,there just above the turbo\'s,thay make very little nose as there a recirculating type,lots of people have changed them.

rx7veilside

that fluttering is cossies that dont run a dump valve and is the air flowing back over the turbine blades..not a good idea for long term thats why cars have dump valves

Jono FD3

Quote from: aspthere are 2 bov\'s on a fd,there just above the turbo\'s,thay make very little nose as there a recirculating type,lots of people have changed them.

Only one is a Blow off valve! This fits on to the "Y" pipe where the pipes from the turbos join into one, the other is a pressure relief valve........ something to do with the sequential turbo set up, so I\'m led to believe?!!!

Jono

JapSam

So the question is can you get compression surge on an rx7 ? as that noise makes me go weak at the knees ! i hate the sound of dump valves

Red and Single

Yes you can....buy a single turbo, fit external wastgate, bobs your uncle :)
Dave Hughes
13.352 @ 109.03mph (running 0.75 bar  :rollin )
Red \'95 Type R T04S & Bare Arsed  :chat

McCARTHY

is the chattering not the waste gate noise coming back up through the filter once you have let off ??????

fro

it\'s the compressed air in the inlet (post turbo) trying to escape through the turbo. When you close it\'s path into the engine by lifting the throttle, the air has to go somewhere.
A lot of people (including many journos) refer to it as wastegate chatter but it\'s simply not.

RAW

i get the chattering noise from my Greddy BOV. it\'s definately the valve as i can adjust the volume with the bolt on top.

gsb876

Quote from: Red and SingleYes you can....buy a single turbo, fit external wastgate, bobs your uncle :)

Mine has this  :Thumbs-up
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle

asp

Quote from: Jono FD3Only one is a Blow off valve! This fits on to the "Y" pipe where the pipes from the turbos join into one, the other is a pressure relief valve........ something to do with the sequential turbo set up, so I\'m led to believe?!!!

Jono

a bov is a pressure relief valve,i had twin bov\'s b4 i went single,

BlitzBoy

I luv my compression surge noise on my single, sounds like a group "B" Rally car
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark