Highest BHP form STOCK ENGINE AND TWINS on FD

Started by rmagictastic, January 06, 2006, 11:26:25 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

rmagictastic

As title suggests,

whats the most you can get out of an unported stock engine on stock sequential setup.

answers on a postcard...brag away please this is making a desicion for me.

cheers

Nick
Getting old... Its not like it was in my day!

Kieron

#1
I had stock twins, stock engine, HKS filter, Blitz nur cat back and a dodgy panspeed ecu and made 309.8 at the rear wheels on klotz 118 fuel. Not sure what the timing was and the A/R was down in the 12s

p.S That engine didnt last very long so wouldnt recomend it.

310 to beat  :Ladys-man

dandan

Ask Tricky, he had a pretty big figure on stock twins, stock ports, pump fuel, was well clear of 300rw im sure.

Kieron

Aye, was 320+

Warthog is over 380 at the wheels...

rmagictastic

ah yes, but i do believe that the good mr warthog had ports. please correct me if im wrong.

N

Quote from: KieronAye, was 320+

Warthog is over 380 at the wheels...
Getting old... Its not like it was in my day!

Wav

Quote from: rmagictasticah yes, but i do believe that the good mr warthog had ports. please correct me if im wrong.

N

I think the inlets are just matched to the manifold and perhaps polished, but the actual port sizes on the plate faces are the std sizes IRC.

Paul

Warthog

WAV you are spot on mate, polished runners. The rebuild by Geff, the exhaust ports have been cleaned opened up slightly but not a lot. Other than that std ports. If you are after spec info mate pm me and I can run through all mods etc with you. HTH. :wave
I\'M ALWAYS IN THE SH*T IT\'S JUST THE DEPTH THAT MAY VARY.

Project Evil seven.:evillaugh

RE:WORX---13b RE engine, Motec M400 Pro ECU, Os Giken 5 speed internals-Gearbox, HKS T51R KAI turbo, With 575 @ Fly, 487.9 @ Wheels @ 1.3bar 420 ftlbs, on PUMP FUEL Sheel V-Power. BUILT & TUNED BY RE:WORX. More work planned..:InLove

REW, Stock Twins, RE:WORX-- British Record, 389.2 @ Wheels -- 03/09/2005.

907

Mine made 316.6 rw at reworx
mods are decat, apexi filters, apexi ecu running at .9 bar.

Christopher

I had 314bhp @ 0.8bar on stock engine and seq tubbys.

tr1cky

Yeah, as said 322@ the wheels, stock engine, ports, fuelling, etc :p ....

Just intake, exhaust and Power FC ;) .

Warthog\'s is defo the most being pushed out at the mo tho, don\'t really think it could be taken much further, without spending ££££ on crazy things like Motec ECU, etc....

Are you getting ideas comparing against a Single set up?? If so, IMO, building up the rest of the car- intercooler, fuelling etc around the twins is the best way forward-then move to a single later!


Rich
The FC is dead, long live the FD