Turbo Upgrade!!!

Started by Rx7Chris, October 15, 2005, 04:27:50 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Rx7Chris

Hi Guys

Just wondering my Rex is nearly on the road now  :) (about time) but the question is i want a single turbo and don\'t realy know which one to go for and i need some help????

I realise that as my Rex is still completly standard i need reliability mods i\'m not prepared to just ram a single turbo in there without first considering the reliabilty factor.

So basically what i am asking for in you great clever people if you wouldn\'t mind is could you tell me what nice bits i should be putting in my car first.

Cheers Guys

bnaellis

How much power do you want?
how much boost do you want to run?
whats the purpose of the car mainly track use? mainly road odd track use?
how much lag do can you put up with?
Will you be running on stock ports?

Info on the above will help answer your original question.
Also you will need bigger injectors, fuel pump, fuel pressure regulator, bigger intercooler, ecu, bigger better flowing exhaust system, boost controller.
Dependant on some of the above answers, you will also need ignition amp, colder rated spark plugs, water injection.

rgds

gsb876

They reckon the stock fuel pump is good for up to 420hp @ flywheel, after this will require a bigger pump like a BNR33 or something ?

As Brian says really if you can answer his questions then we can see what you can get matey ?  :yes
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle

BlitzBoy

plus you need a robust wallet that can take the pain lol
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Rx7Chris

Hey Guys!

Thanks a lot for your quick replies!!

Actually i forgot to mention that it allready has a Blitz Nur Spec exhaust fitted

Erm well i am totally open to ideas on what boost and stuff i want to be running.  I was looking to get around 350-400 at the wheels i know this sounds a lot!!!!

Also when the car goes in for a rebuild this is when i want the work to be done as i suppose their is no point in doing it at the moment. (make a fresh start eh)

Hope this helps you answer my question a little better i\'m fairly new to the japanese scene and have always dreamed of having a Rx7 but i understand that reliability is a main factor in keeping these cars at their optimum.

Rx7Chris

Oh and also forgot to mention it\'s mainly for road use and the odd track day.

Thanks

robedwards99

Quote from: Rx7ChrisErm well i am totally open to ideas on what boost and stuff i want to be running.  I was looking to get around 350-400 at the wheels i know this sounds a lot!!!!

I think high 300\'s are achievable without going the single route, making it cheaper to do I think.

RX7... The Deep Pocket Rocket...

Rx7Chris

Are they???

Cool well how would you go about that then mate

ScuttleRX

check out this thread

Got some of the power figures, times etc for some motors with stock twins, if you click on some of the highlighted names it will link to to their car page, and show what sort of mods they\'ve done to achieve this.

Exhaust and ecu changes (along with a small increase in boost), will net an extra 50hp on a standard car no probs :)

What your aiming for power wise is achievable with the twins, and easily (although probably more costly)achievable with a single upgrade (and all the extra bits that go with that ppl have mentioned) :)

robedwards99


RX7... The Deep Pocket Rocket...

ro284

I think Tricky\'s  mods have worked out very well and is a good guide to what can be done, i wonder if anyone has a graph of similar mods to Tricky\'s car, Pfc. exhaust, filters. etc, but running non-sequetial twins, that would be interesting,
cheers Bob

tr1cky

You can defo get the power with Twins.

I\'ve managed 320bhp at the wheels on just intake, exhaust(downpipe,midpipe) and Apexi ECU :)

With WI, intercooler, etc more power will be poss and reliablity will be increased.

Look at Warthog\'s motor 380ish bph at the wheels :god

Prepare for having some deep pockets!

Might be worth looking at non seq turbo conversion if your doing alot of track days.

Cheers Rich
The FC is dead, long live the FD

tr1cky

Damn you guys are too quick for me today :rollin  :rollin

Rob, if your not a member, its not possible to view the thread, nice try though :)

At work at the mo, will post up my graph when I get home :evillaugh
The FC is dead, long live the FD

tr1cky

As promised......
The FC is dead, long live the FD

Rx7Chris

Thanks for that great help i now know where to start cheers guys