Greddy SMIC

[davegttph1]

I know I just said that....  

I honestly dont believe that IC isnt big enough to have an effect big enough to chuck the fueling out.... for a start sticking a bigger IC in that place wont be very effective as the air flow is very poor there and any bigger IC will probably be worse for the car due to heat soak...

IMO off course

[Christopher]

When I had the ARC smic my injection went up to 93% at 0.9bar. It wasn\'t as thick as the one in the pics though so would have been higher if it was.

[bnaellis]

Steve you would only need a nother set of 850 secondary injectors to replace the stock 550 primaries. Bigger fuel pump is not needed for your mods, the stock pump is more than enough at the mo,
I\'ve tuned enough fd\'s now to talk from experience rather than educated guessing. Allstaruk is correct. Get yourself a wideband and datalog your afr on a few runs. Fit your new intercooler and do the same and see the difference in your afr. Running your injectors at & above approx 90% duty cycle is not recommended and will end in injector failure.

[Steve Burnett]

Thanks brian, good to know I don\'t have to start with fuel rails and all that other expensive stuff.