Fastest Stock Twins thread

Started by Glenn Butcher, August 24, 2005, 03:36:17 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

shaunwil

I\'m trying to make the shakespear RWYB, should be a good do. Plus its closer than santa pod ! Hopefully will have the new clutch fitted by then. As said before the stock clutch isn\'t much use when you get to 300bhp ATW. Mines just spinning up when i load it up, but its still running since RS2 on less than energetic runs out :p

Is it a daytime RWYB ?

Cya soon

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

ScuttleRX

Looking very likely i\'ll be heading to santa pod now next sunday as well as shakespeare, friend has been twisting my arm, and im starting to relent...So with a bit of luck see you chaps there :)

Prob wont be on mazda stand tho as I dont want to get a ticket as I still might not be able to go, dont want to take a place in front of a person whos definately going. Plus will prob spend most of the day in the queue anyways :D

Sy.

should be there on the 9th to beat my time when on standard boost as now upped to hopefully 1 bar ish.

stuart wizy

can you put me on the table please ?
first ever drag race ive  done and out of 10 runs got two 12sec times, best 12.883 seconds reaction 0.75    60-2.014    330-5.485    mph1- 85.94  
660- 8.349    990-  10.73   mph2- 108.00
the engine was rebuilt by tim rx motors on stock twins 1300cc sec injectors, trust std mount intc, power fc, blitz sbcid controller set at 11psi.
pip mapped the car 2 months ago with intake temp at 52 ish degc boost 11psi, which made 280 ish rwhp.
however i pushed and started the car more or less on the line to get temp down to 32degc and did this run.
by the way, it was at shakespear county raceway 2nd oct, silver fd with std wheels on front and gold volks on rear if anyone watched.
im putting aquamist dual stage water injection on this wknd to get intake temps down bellow ambient.
with better rection time and a bar of boost, daddys gonna do 11 sec run on 15th16th at shakespear!!!!!!!!!

Warthog

Welcome to the game mate, are you at the Pod on Sunday? :cool
Oh and pay your full membership and be part of the family. :spank
I\'M ALWAYS IN THE SH*T IT\'S JUST THE DEPTH THAT MAY VARY.

Project Evil seven.:evillaugh

RE:WORX---13b RE engine, Motec M400 Pro ECU, Os Giken 5 speed internals-Gearbox, HKS T51R KAI turbo, With 575 @ Fly, 487.9 @ Wheels @ 1.3bar 420 ftlbs, on PUMP FUEL Sheel V-Power. BUILT & TUNED BY RE:WORX. More work planned..:InLove

REW, Stock Twins, RE:WORX-- British Record, 389.2 @ Wheels -- 03/09/2005.

John Yorke

Quote from: stuart wizycan you put me on the table please ?
first ever drag race ive  done and out of 10 runs got two 12sec times, best 12.883 seconds reaction 0.75    60-2.014    330-5.485    mph1- 85.94  
660- 8.349    990-  10.73   mph2- 108.00
the engine was rebuilt by tim rx motors on stock twins 1300cc sec injectors, trust std mount intc, power fc, blitz sbcid controller set at 11psi.
pip mapped the car 2 months ago with intake temp at 52 ish degc boost 11psi, which made 280 ish rwhp.
however i pushed and started the car more or less on the line to get temp down to 32degc and did this run.
by the way, it was at shakespear county raceway 2nd oct, silver fd with std wheels on front and gold volks on rear if anyone watched.
im putting aquamist dual stage water injection on this wknd to get intake temps down bellow ambient.
with better rection time and a bar of boost, daddys gonna do 11 sec run on 15th16th at shakespear!!!!!!!!!


Go for it chap :cool

ScuttleRX

Quotebest 12.883 seconds

nice time matey :) Got any pics of your rex? Just curious, how come your running standard wheels on the front and volks on the back, thought the general trend was to do the opposite (i.e smaller wheel, bigger sidewall on the rear end for a better launch). This is of course assuming your volks arent wrapped in a set of sticky drag tyres :D

Warthog

Rules are Rules, road tyres only no Slicks  :spank
I\'M ALWAYS IN THE SH*T IT\'S JUST THE DEPTH THAT MAY VARY.

Project Evil seven.:evillaugh

RE:WORX---13b RE engine, Motec M400 Pro ECU, Os Giken 5 speed internals-Gearbox, HKS T51R KAI turbo, With 575 @ Fly, 487.9 @ Wheels @ 1.3bar 420 ftlbs, on PUMP FUEL Sheel V-Power. BUILT & TUNED BY RE:WORX. More work planned..:InLove

REW, Stock Twins, RE:WORX-- British Record, 389.2 @ Wheels -- 03/09/2005.

sdminus


Kieron

12.8 with only 280bhp  :eek  I need to sort my driving out LOL

Welcome to the game  :D

andrewrx7

Blimey, feeling a bit outclassed!

Only got a measly 230-240 @ the hubs (280 @ fly)!

Think I\'ll be continuing to prop up the table! :rollin

Good time, StuartWizy!  ;)

chrisBoid

Quote from: stuart wizycan you put me on the table please ?
first ever drag race ive  done and out of 10 runs got two 12sec times, best 12.883 seconds reaction 0.75    60-2.014    330-5.485    mph1- 85.94  
660- 8.349    990-  10.73   mph2- 108.00
the engine was rebuilt by tim rx motors on stock twins 1300cc sec injectors, trust std mount intc, power fc, blitz sbcid controller set at 11psi.
pip mapped the car 2 months ago with intake temp at 52 ish degc boost 11psi, which made 280 ish rwhp.
however i pushed and started the car more or less on the line to get temp down to 32degc and did this run.
by the way, it was at shakespear county raceway 2nd oct, silver fd with std wheels on front and gold volks on rear if anyone watched.
im putting aquamist dual stage water injection on this wknd to get intake temps down bellow ambient.
with better rection time and a bar of boost, daddys gonna do 11 sec run on 15th16th at shakespear!!!!!!!!!

Updated :)  That\'s a great time with that power, keep up the good work!

Warthog

Sorry Chris, but I do feel the issue of the tyres needs to be resolved before posting a time. Was this time done on road legal tyres or not? It is a pointless exercise us all trying to improve within the rules if it\'s not a level playing field. I have no problem with any non-member joining in but we do need to know that the run has been done according to the rules we all agreed on. :wave
I\'M ALWAYS IN THE SH*T IT\'S JUST THE DEPTH THAT MAY VARY.

Project Evil seven.:evillaugh

RE:WORX---13b RE engine, Motec M400 Pro ECU, Os Giken 5 speed internals-Gearbox, HKS T51R KAI turbo, With 575 @ Fly, 487.9 @ Wheels @ 1.3bar 420 ftlbs, on PUMP FUEL Sheel V-Power. BUILT & TUNED BY RE:WORX. More work planned..:InLove

REW, Stock Twins, RE:WORX-- British Record, 389.2 @ Wheels -- 03/09/2005.

20B_boy

Quote from: stuart wizywith better rection time and a bar of boost, daddys gonna do 11 sec run on 15th16th at shakespear!!!!!!!!!
Not to poo on your parade but a) reaction time doesnt count for **** on you ET and b) it certainly isnt easy to make up 3/4 of a second on the quarter lol, with a couple of extra lbs of boost or otherwise :D

Anyone else going to SCR on 15th or 16th then? its test n tune yeah? what are limits on numbers? do u have to book in advance? how much? etc?? :)

Personally I think SCR is quicker than Pod, although I know others dont agree!

All good fun!
R.
R.

chrisBoid

Quote from: WarthogSorry Chris, but I do feel the issue of the tyres needs to be resolved before posting a time. Was this time done on road legal tyres or not? It is a pointless exercise us all trying to improve within the rules if it\'s not a level playing field. I have no problem with any non-member joining in but we do need to know that the run has been done according to the rules we all agreed on. :wave

I gave him the benefit of the doubt (and assumed he\'d read the rules) and stuck him on the table, that way I won\'t forget to do it :)  But yes, if he admits to using slicks then he\'ll be removed.