Removal of double throttle

Started by Madden, August 09, 2005, 08:19:48 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Madden

has any one dones this yet.  I done mine today and im now suffering idle proplems i can get it down to 800rpm adjusted it all the way and cant go no further.  Also having problems with second turbo the boost goes up to 0.8 then down to about 0.65 and then only goes to 0.7 any ideas?    ave check for vacume leaks and everything is ok?

Cheers Jamie

sdminus

Are you sure every thing is seated correctly. Sounds like it could be an air leak

Scott

Madden

thats what i thought but cant find one anywhere will have to take it all apart tomorrow again.. have you done the mod what did it do to yours?

asp

uv probly done some thing else to it for it not to idle proply,
did u ditch the cold start as well,mine was ok wen i did it.

sdminus

Mine still has it mate. Sorry

Scott


Madden

No i have left the cold start on with the water supply still there.   Its not hunting or anything idles fine just cant get it any lower then 1000rpm with the ass screw all the way in and the tas all the way out not even touching the cam.  I have even pulled an vacume hose of and the car starts to behave like an air leak should do.

The thing that is bovering me as the second turbo has lost boost ?