Any one has an idea what is up with my FD

Started by michaelb, July 26, 2005, 06:46:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

michaelb

Hi all

I have 96 RB Bathurst jap import with a 1.5 years ago engine re-build by RXMotors.  Car had a full service about 10 months ago ( petrol filter was changed aswell )

Today I could only use about 10 to 20% throttle.  Every time I put my foot down the engine would choke, splatter and almost limbo.  If I used only the above mentioned throttle the car would drive OK. and get up to any speed.  This happened before on my old FC and it was just a petrol filter…Also ones or twice on this car.  (When I switched off and started the problem would go away).
Towards the end of the day the problem just went away…The car drove fantastic. I was booked at Rotechnicks for Wednesday morning but I cancelled.
I think it could be the injector(s)…
What do you think guys?

Regards,
Michaelb

cjr

Personally i would check the map sensor. S**t loads off smoke ou tthe back ????
A small turbo

g11ary

yeah check sensor, small black box mounted on rear fire wall, passenger side, to the right of the manifold, should see vacum hose on it.

michaelb

Quote from: cjrPersonally i would check the map sensor. S**t loads off smoke ou tthe back ????

Thanks for the replay

I was in the car at the time so could not see at the back, but I don\'t think it was smoking..
Excuse ignorance what is map sensor and what shoul I look for re malfunction ? The car is practicaly stock apart from HKS back end, Blits BOV etc.
It does however goe incredibly fast - I dont know if there is other mods - dont see any...mind you I probably would not know what to look 4
Regards,
Michaelb

michaelb

Quote from: g11aryyeah check sensor, small black box mounted on rear fire wall, passenger side, to the right of the manifold, should see vacum hose on it.

Hi  

Thanks for the replay

What does the box really look like and is it easy to find ?

Regards,
Michaelb

g11ary

smalll black box with small pipes going to it, approx 1"x2" in size in the place I discribed. Think from memory says map sensor on it.

michaelb

Quote from: g11arysmalll black box with small pipes going to it, approx 1"x2" in size in the place I discribed. Think from memory says map sensor on it.


Hi
 
Many thanks for the effort in sending the photo with the sensor circled.  I found it and it does say sensor on it.  It looks easy to replace.  Do you have an idea how much it costs? What does it do exactly? If the problem comes back I just may change it.  It looks easy to do.
Thanks to people like you we all learn more and more about the cars we drive.  Thanks again.
If I can ever return the favour in IT technology do ask.  Here are my sites. //www.bukowskicomputers.co.uk and //www.bukowskiwebhosting.co.uk

Regards,
Michaelb

PS I hope moderators do not mind me listing my sites.

g11ary

Just check the pipes on first.
It is unusual for it to be intermittent, but it happened to me coming back from LeMans 4 yrs ago, Rotechniks changed the sensor and all was well, but mine was not intermittent, might want to check before just replacing, could be dirty injectors, they may want cleaning, could be fouled plugs, could be leads need replacing as they break down etc etc....

michaelb

Quote from: g11aryJust check the pipes on first.
It is unusual for it to be intermittent, but it happened to me coming back from LeMans 4 yrs ago, Rotechniks changed the sensor and all was well, but mine was not intermittent, might want to check before just replacing, could be dirty injectors, they may want cleaning, could be fouled plugs, could be leads need replacing as they break down etc etc....

Hi

Many thanks again.  I may just take the car for a oil filter change and have it checked out by Rotechnics or ReWorks

Regards,
Michaelb

OrecaViper

Dude,
I had this problem for a while, your car sounds like it has gone into "limp home mode" and that the ecu has detected a sensor down or something and it only allows you to use about 15% of throttle as it believes that the "problem" may cause damage otherwise.
There wasnt a prob with mine in the end and I think that the ecu just had a moment. You can reset this mode by disconnecting the battery and pressing the brake pedal for about 20 seconds to drain the residual power from the ecu, reconnect the battery and if you have a definate prob then it will obviously come back, if not then HAPPY DAYS!!

michaelb

Quote from: OrecaViperDude,
I had this problem for a while, your car sounds like it has gone into "limp home mode" and that the ecu has detected a sensor down or something and it only allows you to use about 15% of throttle as it believes that the "problem" may cause damage otherwise.
There wasnt a prob with mine in the end and I think that the ecu just had a moment. You can reset this mode by disconnecting the battery and pressing the brake pedal for about 20 seconds to drain the residual power from the ecu, reconnect the battery and if you have a definate prob then it will obviously come back, if not then HAPPY DAYS!!

Hi

Thanks for that mate.  I have not been to Rotechnics yes as initially the problem went away.  It has however come back now again.

The problem “pops up” every anther day.  It always happens in the first 5min of driving or immediately when I start driving..  Some times when I switch off the car and put it back on it is all fine.

I am going to try your idea now and let you know in the next day or two if it has gone away for good â€" it would be nice…

Regards,
Michaelb

michaelb

Hi all

I thought that I should let you know what the problem was with my car.  I finally went to Rotechnics and it was the vacuum pack located under plenium chamber.
It was an expensive morning.  The job and the parts cost me a massive £652.44
Dave at Rotechnics did however give me a discount as it was going to cost over £700
I also had a small pressure valve changed and small coolant hose (throttle body â€" back plate)

I guess the mods will have to wait..

Regards,
Michaelb

TRex

Quote from: michaelbHi all

It was an expensive morning.  The job and the parts cost me a massive £652.44
Dave at Rotechnics did however give me a discount as it was going to cost over £700
Regards,
Michaelb

  :eek:  :eek: !
TRex the Ecowarrior - Recycling exhaust gas and using it to create energy. Just doing my bit

grinder

GOOD GOD

do all FD owners have a money tree aswell ??


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

FD3Typer2

That sounds like a lot of money for the work.