my cosmo\'s mapped thanks wgt

[kev-yorks]

Just got back from WGT a big thank you to Pip and the crew for setting the microtech up for me.  421hp@6500rpm
The car was mapped at 10psi we\'re not sure what the car will do flat out as we called it a day at 6500rpm but the power curve was showing no signs of tapering off though the torque curve had just flattened out. i\'ll be back for another session when the stock intercooler has been upgraded for a large custom one.:wave

[antnicuk]

Well done Kev,  is that at the wheels?   The car must feel great,  roll on 15 psi:D

[kev-yorks]

Thats measured at the hubs Pip says they still have a issue with the calibration. The figures are all reading lower than they should be. As for 15psi its going to take a while to get used to 10psi first. Sods law i found out tonight the new intercoolers now in the country, i\'d of liked that on for mapping as according to the lads at WGT the stock one was resticting the flow and costing quite a bit of HP:3gears-rh

[g11ary]

awesome mate.  


Just deleted duplicate thread.

[Icesurf3r]

Very nice results

Pips Dynopack is reading low by approx 15% so add that onto your already great results, and it makes them even better.

421 + 15% = 484

[normski]

Are you still running standard set up, ie twin turbos with that power :rolleyes:

[kev-yorks]

Question please
Are you still running stabdard set up, ie twin turbos with that power

The mods to the car are listed in the members rides section. Its well worth the bit of cash to become a full member if only for the club discounts
In answer to your question i\'m running a 20b cosmo, street ported,GT42 single turbo,trial wastegate,1600cc secondarys and various other mods. I\'m still only playing with the car at the moment once the new intercoolers on i\'ll look at taking the boost beyond 10psi possibly with water injection as well
Regards Kevin

[chrisBoid]

Excellent stuff!  Mmmm triple.

[20B_boy]

Originally posted by Icesurf3r
Very nice results

Pips Dynopack is reading low by approx 15% so add that onto your already great results, and it makes them even better.

421 + 15% = 484

Really? does that go for his torque figures too?! :rollin

Kevin - if u r ever down south please come and see us in Portsmouth, would love to salivate over the Cossie

[normski]

Yes must join, after rotorstock,

He said when he drove it, and the boost cut in, it all went blurrred. good luck with it. ANyway is, 500bhp not enough ??:3gears-rh

[kev-yorks]

Yes spoke to Pip
Yes must join, after rotorstock,

He said when he drove it, and the boost cut in, it all went blurrred. good luck with it. ANyway is, 500bhp not enough ??

 What can i say whatever you\'ve got you always want a bit more!
Pip was under the impression the stock intercooler was a bit of a problem and as i\'ve just had a custom one shipped in from Aus i may as well put it on now. Then i\'ll probably go down the water injection route for a bit of saftey when i wind the boost up.
 To be honest i didn\'t expect such good figures on my first attempt at playing with a 20b and credit must go to Pip for checking everything over and mapping the microtech for me.

kevin

[gsb876]

All of my work is done via WGT and Pip, usually find it top notch no complaints until you hand money over :rollin :rollin :rollin

Gurj

[normski]

If ya wanna play, yu got to pay. Not a nice saying but it\'s true...:god

[Icesurf3r]

20B Boy YES Really

Had my car mapped at Pips the other week, and he explained that it was reading low by around 15% for the BHP, but not sure if it applies to the torque figure too.

[Oedipus Rex]

Originally posted by 20B_boy
Really? does that go for his torque figures too?! :rollin

Kevin - if u r ever down south please come and see us in Portsmouth, would love to salivate over the Cossie

1184lbs?


thats nothing my goped gets better than that ...... uphill.


edited due to my seeming inablilty to hit the right kets on my keybosrd