My Championship winning ports are just right!

[20B_boy]

I thought there was some kind of handling course or test thing happening at RS?

[Carl]

Originally posted by 20B_boy
I thought there was some kind of handling course or test thing happening at RS?

I think it has been cancelled.
Regards
Carl

[g11ary]

The Auto solo which like a handling coarse has been cancelled due to lack of interest, but would not have been a circuit for racing. There is a drift circuit.

This has been an interesting thread with some monster porting from Carl.

When are we going to see what Reworx offer with there porting & reworx dowling, might be good for comparison. There customers might be interested in seeing what size ports they have.

[Timrxmotors]

Originally posted by Carl
I rather think that the boot is on the other foot Tim!At least my ports have been running for the last 5 years,and your\'s have only just been produced!LOL!
It is good to see that finally after years of trying to persuade you,that you are now doing porting,I can still remember not so very long ago that you were very much against the idea.And I will say that the porting you are doing is none too shabby either.Looking forward to your car running in anger again soon!

Regards
Carl

Running for 5 years,in one engine.Where is an example of some porting for drag racing? Come on,you\'ve had 5 years.Your RX3 use to keep up with my 12A!
I don\'t think you persuaded me to do any porting,it was more out of necessity to make my 12A faster,considerably faster than you.
I hope one day soon you will make something to challenge the Purple Peril,it wouldn\'t take you long to port that RX3,so see you at Rotorstock then.:rollin

[Carl]

Originally posted by Timrxmotors
Running for 5 years,in one engine.Where is an example of some porting for drag racing? Come on,you\'ve had 5 years.Your RX3 use to keep up with my 12A!
I don\'t think you persuaded me to do any porting,it was more out of necessity to make my 12A faster,considerably faster than you.
I hope one day soon you will make something to challenge the Purple Peril,it wouldn\'t take you long to port that RX3,so see you at Rotorstock then.:rollin

I am working on something,but it will not be ready for rotorstock!
Anyway you were the guy who said many times that porting was not neccessary,and we had plenty of lively discussions about it that I thought it was!LOL:D
I will try to give you some competition soonish for the Purple peril,and wish you all the best for it.Great work Tim,keep it up.
regards
Carl

[g11ary]

Can someone lead Rich a camera, we would like to see some porting, esp on the red dragger. Carl and most others have split the beans.......

[Brett]

Carl,

 What series is that race engine running in?  Is it a mixed series with boingers too?

 I\'d show you my porting only mine is more of a chamfer...:rollin

[g11ary]

Hi Brett
This car is racing at Brands on the 14th and 15th, and yes it will be troncing all over the mustangs, cameros and what ever get put in the race. Its quite an amazing little car, and the driver an\'t too shabby.

[Brett]

I\'d go and watch only I\'m booked to be putting a floor in my TII over that weekend :rolleyes:

[mattmaclennan]

Carl and most others have split the beans..

Tim and Brian then. What about a Pip Port or a Ross Port maybe even a Hurley Port... Rotecnic\'s? Be good to see the ports from the fastest FD in the country, but I don\'t suppose it was just porting that made it that powerful.

[g11ary]

More likely the fact it was having around 2 bar shoved through it.

Come on others, lets see the goodies, Rich is always badgering Carl for info and pictures. Surely they dont just copy them.

[Brett]

Housings.

I\'ve noticed that most of you (engine builders) are porting the housings, are you getting them recoated after this or do you run them on the aluminium like some of the bike rotarys?

[g11ary]

here one I practised on earlier.......

[Carl]

Originally posted by Brett
Housings.

I\'ve noticed that most of you (engine builders) are porting the housings, are you getting them recoated after this or do you run them on the aluminium like some of the bike rotarys?

Hi Brett,
The rubbing surface on mine still retains the Chrome.
I know that Tim of RX motors is playing with ceramic coatings in his new engine.
The Chrome is put on top of a steel insert which the Aluminium is moulded around.
I get my side housings re Nitrided.
Regards
Carl