Axle Stands and Jacking points 3rd Gen

Started by Gerry M, February 27, 2005, 01:28:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Gerry M

Wheres the best place to put them front & rear??

Cheers

Gerry
The tartiest rx in scotland

babz_audio

this would be very useful as ive gotta change the gear box oil on my fd...im sure Wav knows so please tell us :D
RE:Amemiya RX7 R2 Single Turbo HKS T04R

e-mail: mo9797uk@yahoo.co.uk

scooby_si

i can narrow this down a bit:































the underneath of car :god
i thank you
Si

Gerry M

Its ok I found it
The tartiest rx in scotland

scooby_si

i thought folks said using jack on diff was a bad idea? :confused:
Si

Donato


Donato


Gerry M

QuoteOriginally posted by scooby_si
i thought folks said using jack on diff was a bad idea? :confused:
Si

I\'d think it would be ok with a block of wood between the 2 to spread the load & not have the jack pad directly on the diff casing
The tartiest rx in scotland

jonrx7uk

I jack / stand mine at the same places as Donato with no problems.  I have never liked jacking at the sills... :eek:

jon

grinder

QuoteOriginally posted by jonrx7uk
I jack / stand mine at the same places as Donato with no problems.  I have never liked jacking at the sills... :eek:

jon

yeah i know what you mean about the sills

apart from I did - and put the jack thru them :(


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Shark

I usually jack up on the sills and put the stands straight in the same as Donato.

no problems so far!
Gregor
\'94 Hiace "Super Custom" | \'96 RX-7
[SIGPIC][/SIGPIC]

RX7 sold :(

shaunwil

Id be careful putting it under the antiroll bar pickup. The stock brackets are like swish cheese. I used the two points with the bolts in for the axle stands. Bit further in but nice and solid.

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

marcusd666

What I found with mine when I jacked the front up if you still have the under tray you cannot put the stands where indicated above as the under tray covers that part so I put my stands on the sub-frame where the lower wish bone bolts to it. Similar place to the rear really.
marcus

'92' RX-7 FD3s type-R Black
'04' RX-8 231 Winning Blue (sadly missed)
'10' AUDI A5 S Line Convertible (Daily Drive)