Messages

Fh06 is simply the model number.

Due to a mistake I\'ve ended up fh06 reflectors for the FC.
These are brand new in box and I\'m asking just £50 for them.
These are already in the UK with duties paid.

Odd tyres are a big no for me especial when it\'s left to right. They will have different levels of grip. I also used to have fish tailing issue although on acceleration when i first got my car because it had some 225 stretched on the back. Also you might want to think diff it could be damaged i guess particularly if it\'s aftermarket 2way.

Somethings wrong cruising temp should be 86C.

What goes wrong when you go over a 1bar not that i\'m planning to but can\'t really see why it would cause a failure of the turbo. I always thought going over 1bar just put you out of the turbo\'s efficientcy.

Didn\'t realise the silver one was that powerfull, when i went in it the power delivery was really linear very nice drive.
He mapped mine at the weekend which was just short of 400bhp on sequentials but the car apparently has quite a bit more to give.

I don\'t know why people "upgrade" to small singles as alot of people don\'t seem to make huge gains over the twins.

I thought KS EBSIII only work with stock ecu\'s and KS ecu\'s.

Jason from super7 achieved 400 FWHP.

Cheers
Mir

Recently? The same car that also made 385ft/lbs of torque?

thats mine

How low RPM you talking. They can start kangarooing and stall when you drop below 2000 rpm.

Could try autosmart. Or polish them with some cutting compound.

I think i\'ve seen it done, obviously it\'s non sequential so the lag is the same for similar power on a single.

They probably won\'t fit.

So under a certain condition the walbro flows more; in actual real life working conditions the denso flows more. Not to mention again that the denso is more reliable and quieter. And as both pumps are probably suitable for this application in terms of flow i would pick the one which was better all round, flow is not everything when it comes to a fuel pump.

at 13.5v and 43 psi. Walbro 341 = 255lph
Denso supra = 290 lph

It flows more it\'s quieter and it\'s more reliable.

FYI at if turn the pressure up it goes well over 300lph if i recall correctly.