Fuel Pump Capacity?

[323GT-R]

Does any body know what litres / hour the FD fuel pump is rated for? I have a Mazda 323 GT-R, and my pump is rated for 100 litres / hr, I heard that the RX7 one fits straight in, I just want to check the capacity before I go ahead and get one.

Thanks

[MikeLMR]

http://www.mazdaformance.com./technical2.htm

states the pressure but not the flow

but ....

Fuel Pump Specs

 

Holley In Tank Fuel Pump          190lph/225lph   425/575hp

Walbro 255                              213 lph(40psi) @ 12v 255 lph(40psi) @ 14v

RRE DENSO Upgrade (eclipse)     150lph(43psi) @ 12v 210lph(43psi) @ 14v

Supra Twin Turbo                      260lph(43psi) @ 12v 290lph(43psi) @ 14v  (650 / 775 hp)

3000gt VR4 / Celica Gt4            180lph(43psi) @ 12v 225lph(43psi) @ 14v (estimated)

RX7 Twin Turbo                        210lph(43psi) @ 12v 260lph(43psi) @ 14v (estimated)

HKS In Tank Upgrade                250lph(43psi) @ 12v Bosch 0 580 254 984

borrowed from here http://www.alltrac.net/tuning/fuelfaq.html

Hope that helps

The Supra Twin Turbo pump is also a direct replacement for the third gen one and it flows more , they are both Nippondenso so it should fit your 323 as well (presuming the 3rd gen one fits that is)

can you post some piccies of your car ... I\'ve got a 323 1.3 SE hatchback as my daily driver,
Mike :wave

[j9fd3s]

the fd one is "bigger" it does drop right into a 323, we did it it works great

mike

[323GT-R]

Thanks Mike + Mike. I can get an FD pump fairly easily, and it looks like it does flow more than mine, and more than enough for the power I have - currently just over 300 BHP, and a little more still to come, although I\'m only aiming at 320 - 330.

The website that hosts my pictures is down at the moment Once it\'s back up, I\'ll post a link. It\'s not a patch on an RX7 for looks, but it\'s a little different from the usual Scooby / Evo / GTiR type of car .

[MikeLMR]

you can upload photos here ... 1 per post though and limited to 1.5Mb

Mike

[j9fd3s]

Originally posted by 323GT-R
Thanks Mike + Mike. I can get an FD pump fairly easily, and it looks like it does flow more than mine, and more than enough for the power I have - currently just over 300 BHP, and a little more still to come, although I\'m only aiming at 320 - 330.

The website that hosts my pictures is down at the moment Once it\'s back up, I\'ll post a link. It\'s not a patch on an RX7 for looks, but it\'s a little different from the usual Scooby / Evo / GTiR type of car .

wow thats cool. the one we did was maybe making 220ish to the ground (stock turbo @17psi)

mike

[323GT-R]

Here we go :-



The rest are on http://www.323gtx.co.uk/Kes\'sGTR.htm#. The spec is a little out of date now, the site owner is rebuilding the whole site, and hasn\'t got round to updating it all yet.

[clive]

Hi and welcome.
 
As a 323 fan have you heard of any 323 Rotary\'s in Britain ?

All the best Clive
clive@mazdarotaryclub.com
//www.mazdarotaryclub.com

[MikeLMR]

hmmmm, how much does a 323 gtr go for ?

[323GT-R]

CLive, I havn\'t seen or heard of any in the UK, there are a few elsewhere in the worl though. Since the car is 4wd, all the gear to fit a rear axle and prop is already there, I think there are major bulkhead mods needed though.

Mike, sore point at the moment. I payed ~£5K for mine last year, which was the going rate at the time. The prices have dropped a lot since then, 2 friends are importing at the moment for around £3.5K. Some you win, some you lose . I doubt the values will change much now, as it\'s increasingly hard to find cars in Japan.

[j9fd3s]

we didnt get that 323 her in the states, we never get cool cars .

here\'s the one we did http://www.2751engineering.com/323.html

[MikeLMR]

This ones mine ... along with the \'Lincs Louth Mafia\' after taking part in production car trial (hance why they are all filthy)  

Left to right  

Daves Skoda Rapid (used to have an alfa 2 litre on twin dell\'s , but thats moved to his other car so its back to the 1300)

My 323 , Standard appart from a 6 foot key scratch :reallymad. oh and mx5 steel wheels to get a decent amount of rubber on the road

Dans Cavaliar, decked out for 12 car rallies (aka the red shed )

Marks 998hp mk1 fester  (well the number 998 features somewhere in the spec )

[323GT-R]

According to Jaustech in Aus, the fuel pump from the Cosmo 20B has a greater flow capacity again than the RX7 one. It would probably cost more to get one of those through Mazda over here than an aftermarket upgrade RX7 TT pump, but maybe the info would be useful to somebody.

[Jus]

Originally posted by 323GT-R
Here we go :-



The rest are on http://www.323gtx.co.uk/Kes\'sGTR.htm#. The spec is a little out of date now, the site owner is rebuilding the whole site, and hasn\'t got round to updating it all yet.

Hi Kes!

It\'s Jus! How things bro!

Car looks nice! See you soon mate....

Jus (Jus from up north)