Japi's FC T2 Convertible

Started by re japi, July 02, 2018, 02:00:53 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 ... 4 5 6 ... 61
User actions

clive

#60
August 08, 2018, 09:31:35 PM
Have a good look at the hoses going onto the intercooler as this is the most likely reason for the struggle to make boost.

Worth knowing that on this link you will find a workshop manual for your car and any other Rotary.

http://mazdarotaryclub.com/forum/index.php?topic=66749.0

All the best Clive

re japi

#61
August 09, 2018, 06:46:46 AM
I have tryed to look those hoses as good as I can. Its just ridicilous how much there is hoses and stuff is in FCs engine bay  :)) I have done some research and found those most likely to be faulty points. Unfortunately I dont know crap about turbo cars  :'(

One dude said that maybe turbo is gone/going, but for some reason I dont think so...

I did know one of those pages. But that other I didnt know. So thanks Sir :)

Here is small vid that shows how boost behaves
https://www.youtube.com/watch?v=AL_7_45x2_A
Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

boosted

#62
August 09, 2018, 07:06:59 AM
Thats naff all boost...not even actuator spring pressure...id be looking for the simplest thing a boost leak...which if not obvious mean removing inlet tract pipework inspecting for splits and re installing making sure nice in tight...

Sent from my SM-N950F using Tapatalk

92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

re japi

#63
August 09, 2018, 09:58:18 AM
Quote from: boosted on August 09, 2018, 07:06:59 AM
Thats naff all boost...not even actuator spring pressure...id be looking for the simplest thing a boost leak...which if not obvious mean removing inlet tract pipework inspecting for splits and re installing making sure nice in tight...

Sent from my SM-N950F using Tapatalk
I agree... But I did check it, twice. It has to simple thing, and I'm missing it. I bet its under nose but cant see it...

Lähetetty minun E2303 laitteesta Tapatalkilla

Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

boosted

#64
August 09, 2018, 11:23:09 AM
Top mount intercooler...id remove and reseat check the seal etc.

Sent from my SM-N950F using Tapatalk

92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

RE5

#65
August 10, 2018, 07:08:52 PM
When you remove the Intercooler check the small hose on the back & the alloy pipe as they can be fragile & the rubber hose cab get brittle.
Also, make sure all the small Vacuum hoses underneath. Make sure the TPS wiring connector is clean & good order.
Current: RX7s   FB S3 & FC S5 Vert

Previously owned:  2 x NSU Ro 80 - 2 x RX7 FB S2 - Suzuki RE5 -Norton Commander - DKW W2000

RE5

#66
August 10, 2018, 08:34:05 PM
Do not forget to check your Air Flow Meter.
Current: RX7s   FB S3 & FC S5 Vert

Previously owned:  2 x NSU Ro 80 - 2 x RX7 FB S2 - Suzuki RE5 -Norton Commander - DKW W2000

boosted

#67
August 10, 2018, 08:46:56 PM
You should have a diagnostic box where you can hook up a bulb and get  flashing fault codes.

Sent from my SM-N950F using Tapatalk

92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

KevlarRx7

#68
August 11, 2018, 11:45:32 PM
Time to get the soapy water out.
https://youtu.be/b3KmQenhWDY

re japi

#69
August 17, 2018, 06:02:52 PM
Rotarys and Bear beer, what could man possibly need... Damn I love this car!!!

Lähetetty minun E2303 laitteesta Tapatalkilla

Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

re japi

#70
August 17, 2018, 06:03:58 PM
Quote from: boosted on August 09, 2018, 11:23:09 AM
Top mount intercooler...id remove and reseat check the seal etc.

Sent from my SM-N950F using Tapatalk
That is my next priority

Lähetetty minun E2303 laitteesta Tapatalkilla

Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

re japi

#71
August 17, 2018, 06:04:31 PM
Quote from: RE5 on August 10, 2018, 08:34:05 PM
Do not forget to check your Air Flow Meter.
Umm, how do I check that?

Lähetetty minun E2303 laitteesta Tapatalkilla

Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

boosted

#72
August 17, 2018, 06:27:06 PM
Need todo that diag box test. 1 link and 1 bulb..will flash if it has logged a sensor fault and flash code will tell what it is...be online.
If no codes then not an eleccy sensor fault.

Sent from my SM-N950F using Tapatalk

92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

re japi

#73
August 17, 2018, 06:47:10 PM
Quote from: boosted on August 17, 2018, 06:27:06 PM
Need todo that diag box test. 1 link and 1 bulb..will flash if it has logged a sensor fault and flash code will tell what it is...be online.
If no codes then not an eleccy sensor fault.

Sent from my SM-N950F using Tapatalk
Im afraid to do it, cause I dont know how...,

But I really think its some solenoid or something like that problem, cause sometimes boost raises to 0,2, sometimes nothing...

Lähetetty minun E2303 laitteesta Tapatalkilla
Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

boosted

#74
August 17, 2018, 06:49:21 PM
Its easy peasy...ill find alink.


Sent from my SM-N950F using Tapatalk

92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.
Print
Go Up Pages 1 ... 4 5 6 ... 61
User actions