Recent RX7 Purchase

Started by cknott94, July 17, 2015, 06:57:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

neil_jdmr

No worries mate, that hose looks well shot and if a water house is that bad I'd be pretty sure some of the vac hoses will be pretty hard and cracked too.

Give them all a good check if you can twist them and they turn on the nipple then they are not tight enough.
Standard sequential, standard engine, Oem body, 1.2bar, WI

Twins retired. KKK K27 1.25bar courtesy of Jason and Stu

cknott94

Right, bigger problem now. I was driving back from dropping my brother off tonight and the back right tyre has blown. The car spun and I tried to stop it I wasn't going fast but since it's raining I couldn't slow down hit a fence and it's cracked both the back lights and pushed the bumper up into the boot on one side. How can I get the bumper off or open the boot as it won't open now!

cknott94

It's not incredibly bad, I think back bumper and both tail lights but I'm more shook up than anything never had a crash or bump. Thankfully nobody else was involved and nobody was hurt. Just a bit of a wake up call for the £400 it'll probably cost to buy the parts!

boosted

Main thing is your alright....getting rear bumper of is a bit of faff. 10mm nuts down behind the lights
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

boosted

Fair bit of trim inside boot to remove to gain acces..if the boot not opening may have to climb through and pop the catch from inside. Or have some pull up whilst pulling lever.
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

cknott94

Right, I'll have a look tomorrow just sitting on the drive is it okay to leave it there?

cknott94

Looking on Jimmys Mazda it's £175 for a bumper and the rear lights come with it is it worth buying as I'll need all 3 and can get it resprayed by a friend when it's here

clive

Sad to hear this has happened but pleased your OK
All the best Clive

boosted

seems like a good price....put a wanted thread below though as somebodys bound to have 1 in a shed. piccys would help us determine damage. If the boot not opening would suggest more than just bumper and the rear panel has moved.
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

neil_jdmr

Shit man that's awful news, but as long as your not injured and a rear bumper and lights is at least an easy repair. Front ends with pop ups is a mare.

Hope you get sorted quick fella
Standard sequential, standard engine, Oem body, 1.2bar, WI

Twins retired. KKK K27 1.25bar courtesy of Jason and Stu

cknott94

Getting sorted guys, got a family friend that's going to give it a proper check over make sure nothing more is damaged but I can still drive the reliable fiat around so car can stay in his garage to do as and when he wants. Once I know what I need I may post for parts but he said the bumper isn't that badly damaged and could potentially be fixed as he works mainly in frames, bodywork and respraying so should be in good hands for me car.

cknott94

May just need the 3 lights so could potentially be much cheaper then I thought as long as the frame is okay! (:

neil_jdmr

Check the boot floor mate as this will rust in no time if there is any damage
Standard sequential, standard engine, Oem body, 1.2bar, WI

Twins retired. KKK K27 1.25bar courtesy of Jason and Stu

cknott94

Right no bother I'll make sure to check it!

cknott94

Said it needs to go on a jig to straighten the panel but not sure if the back can be saved as he doesn't work on or with jigs. So going down tonight there is a car repair place with a jig shop near my house so will see what they think and if I need a new panel then that's what I'll have to do!