Losing Water coolant after 5-6 drives.

Started by YAU730, July 11, 2015, 01:04:41 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

YAU730

To my understanding coolant will be in the 3 areas, 1, 2 and 3 as highlighted in my picture?

part 1 always seems to run dry causing the dash coolant light to flash red so i top it up with just water till max but after 5-6 drives it will go near dry again n needs topped up were part 2-3 will be steady.

Is there something up with my car or is that just the way it works?

Michael Yau

boosted

Hi mate.

from my understanding number 1 is overflow and pushes out excess water into it and pulls water in under vacuum when reqd.

sounds like 1 either this has a small leak as just plastic and poss faulty level switch in 2. If 2 and 3 are staying bang on then looks ok to me.

coolant switch common failure.
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

clive

You will find that you need only to fill via number 2 and 1& 3,will find their own level

If you just fill every thing up it will keep blowing water out

Hope this helps
All the best Clive

YAU730

Michael Yau

arinb12

check your ast cap... mine was not a pressure cap and was causing that to happen ( can also happen if pressure cap fails)