premix oil ? this or this?

Started by boosted, September 13, 2014, 03:24:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

boosted

Whats everyone using just outta interest?
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

Arnie_O

Royal Purple TCWIII here but then again I would be.
Turbocharged 192ps RX-8 running Meth Injection on an Adaptronic
Fully Bridgeported 231ps RX-8 stripped for the Track
2nd Gen RX-7 TurboII on a GT35r (show winner)

Ed_RX7

Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

leeroy_25

Is that a plain engine oil or a 2 stroke oil Ed?
I found another product by Exol today
 that looks okay. Will try and find some more info on it.

Ed_RX7

It\'s a specific premix....... It\'s what they used in the Mazda 24 hr LeMan car.

If it\'s good enough for them then it\'s good enough for me.

I\'m having difficulty with ratios also......  When I do the recommended 100/1 ... It\'s Amos too much.... So I\'m just trying to find a medium ATM.

 I have no omp btw
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

boosted

where do you get that from, never seen advertised over here?
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

Ed_RX7

i got mine from america.... hard to get over here....due to shipping... and being flammable etc i think.... there is a dealer in germany though....i\'ll try and find the website.
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Ed_RX7

Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

boosted

Cool! just hard a mooch around the website! Greece got there rotary thing going on!

£1 to 1.27E at the mo not bad either....shipping will kill it though!
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

boosted

Think i might get some for the race engine though! added 787B to tank!
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

leeroy_25

Guy\'s I have been doing some research on the EXOL stuff and it seems to have very good reviews generally. It is UK made apparently. Think I am going to try some.. You can buy it in bulk too I think!
http://www.lubetechshop.co.uk/index.php?cPath=22
http://stores.ebay.co.uk/LUBETECH-OIL-SUPPLIES_SYNTHETIC-ENGINE-OIL

Good range.. I message them and see what the say although I guess I will be going for the fully synth race stuff!

Ed, What do you mean it Amos too much?? Smokes? I read a lot and it seems like 100:1 is the recommended amount. Some say down to 120:1 and other people are running race and drag runs at 90:1.

Hope that helps.

Cheers
Lee

Ed_RX7

Yes sorry... Phone correction....... Yes I think 100:1 is too much...... Read on easytuning ratio recommend ed is 2ml for every litre.....So I will double that and see how it goes
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

leeroy_25

I will be starting at 100:1 for sure.. Most seem to run that from what I can see. Would be interested to hear what you find.. Are you sure that\'s 2ml per litre? Maybe you could drop in that is for cars With  Omp?
Cheers
Lee

Ed_RX7

Yes, that\'s the same as what Pettit recommend for protek..... But I will double it s I have no one.

For comparison I used protek r on my last engine .. ... When I stripped it down for a rebuild (it didn\'t need one)... The exhaust ports were so clogged up with gunk. So I\'m gonna make sure I try and get the mix right and keep checking for smokiness until I get it right for my setup.
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

leeroy_25

I Will start with 100:1 and work back from there. I am running a 20B which might make a difference? Shouldn\'t as it\'s all down to how much fuel is getting used!
Keep us updated with your findings.

Cheers
Lee