Loom builders connectors needed

[mikey-t]

Hey guys rebuilding my loom and have everything sorted bar two connectors, I\'m struggling to source these two as is my wire guy, has anyone sourced this connector if so where in high heaven did you get it?

Link should take you to the album with the pics

http://s.photobucket.com/user/cruisemidlands/library/mazda%20rx7/loom%20connectors

[Prof]

You could try the Polevolt catalog:
 
http://www.polevolt.co.uk/
 
But those connectors are similar to the denso injector plugs, so probably a Nippon-denso part.

[mikey-t]

Cheers I will research some more

[mikey-t]

Right apparently the connectors we are struggling with are water and air temp sensors, anyone know a supplier?
Worst comes to worst we will just swap out for a more modern sensor with a connection we can find

[mikey-t]

Progress we have now found a supplier for EvERY connector on the car bar one, we can\'t even find a name company or part number for it,
Can anyone help with this one it\'s for the idle speed control valve connector it\'s a 2 pin connector  and we cannot find it anywhere,
Anyone

[Pidge]

Tried speaking to a rotary garage? Surely they\'ve got old looms hanging around the place?

[mikey-t]

Yeah, I can get old ones that I could clean up but I want all new as I will be selling a couple of looms also, have contacted rywire in the states, tripoint, lms-efi anyone who makes aftermarket looms and everyone has said they don\'t bother with that connector as it\'s too hard to find,

I can\'t leave it at that, they must be out there somewhere even if I have to buy 100 of them

[mikey-t]

Bad news, and I quote

Its not available.  It was made by Sumitomo but is proprietary to Mazda.  Similar to the ignitor connector.  Neither are in any Sumitomo catalog.  You can get the terminals and seals, but the hardshell is not available.

I have had the offer of getting a batch 3D printed though so bear with me!

[Prof]

Now that is a smart solution :-)
 
Is this for an FC or FD just out of interest?
 
I\'m building a new loom out as well, so may well be interested in purchasing the harder to find connectors (mine\'s an FC)

[mikey-t]

It is an FD but you will find that a lot of the connectors will be the same,
The vast majority are one type from one manufacturer it\'s only the things that haven\'t been made by mazda or a mazda endorsed company that are different, so your injectors, idle valve, air flow, knock sensor etc

When you get closer to needing the info mate drop us a message and I will see what I can identify

[GeneralTiger]

ZÅ,Ä...cza sÄ... komponentem, z którym czÄ™sto stykajÄ... siÄ™ nasi technicy elektronicy. Jego rola jest bardzo prosta: Å,Ä...czenie komunikacji miÄ™dzy zablokowanymi lub izolowanymi obwodami w obwodzie, tak aby pÅ,ynÄ...Å, prÄ...d, dziÄ™ki czemu obwód osiÄ...ga zamierzonÄ... funkcjÄ™. ZÅ,Ä...cza sÄ... nieodzownÄ... częściÄ... urzÄ...dzenia elektronicznego, zawsze znajdziesz jedno lub wiÄ™cej zÅ,Ä...czy wzdÅ,uż Å›cieżki, przez którÄ... pÅ,ynie prÄ...d. Forma i struktura zÅ,Ä...cza stale siÄ™ zmieniajÄ..., w zależnoÅ›ci od obiektu aplikacji, czÄ™stotliwoÅ›ci, mocy i Å›rodowiska aplikacji. Na przykÅ,ad zÅ,Ä...cze oÅ›wietlenia na boisku i zÅ,Ä...cze dysku twardego, a także zÅ,Ä...cze do zapalania rakiety, sÄ... zupeÅ,nie inne. Ale bez wzglÄ™du na rodzaj zÅ,Ä...cza, prÄ...d powinien być pÅ,ynny i ciÄ...gÅ,y. Ogólnie rzecz biorÄ...c, poÅ,Ä...czenie zÅ,Ä...cza nie jest ograniczone do prÄ...du.W dzisiejszym szybkim rozwoju technologii optoelektronicznej, w systemie Å›wiatÅ,owodowym, noÅ›nik, który transmituje sygnaÅ,, jest lekki, a szkÅ,o i plastik zastÄ™pujÄ... przewody w zwykÅ,ym obwodzie, ale sygnaÅ, optyczny ZÅ,Ä...cza sÄ... również używane w przelotkach, które dziaÅ,ajÄ... tak samo jak zÅ,Ä...cza obwodów.

[boosted]

Niknak paddywhack? Link dont work what is this? Spam or genuine post?

Sent from my SM-N950F using Tapatalk

[clive]

Here we go Paul, I translated it and it looks like it should help Jamie's insomnia 

The connectors are a component with which our electronics technicians often contact. Its role is very simple: connecting the communication between blocked or isolated circuits in the circuit so that the current flows so that the circuit achieves its intended function. The connectors are an indispensable part of the electronic device, you will always find one or more connectors along the path through which the current flows. The form and structure of the joints are constantly changing, depending on the application object, frequency, power and application environment. For example, the lighting connector on the pitch and the hard drive connector, as well as the connector for igniting the rocket, are completely different. But regardless of the type of connector, the current should be smooth and continuous. In general, the connection of the connector is not limited to current. In today's fast optoelectronic technology, in a fiber optic system, the carrier that transmits the signal is lightweight, and glass and plastic replace the wires in the ordinary circuit, but the optical signal connectors are also used in vias that work the same as circuit connectors.

[Jamie R]

Sleep is overrated....... I can sleep when I die

[clive]

 

Sleep is overrated....... I can sleep when I die