a little help for a stupid question

[brundish24]

right just wondered if i jacked up the rear wheels on axel stands and the ran the car would the speedo still work. if so what would be the safest speed.

[HaywardRotary]

The speedo would work yes as it is connected to the gearbox and detects it\'s rotation.
I would say that it is pretty iffy to run a car on axel stands as if it came off then it could cause the car to jump forward. Just don\'t run it on axle stands.
Regards
Carl

[brundish24]

ok i just keep it jack up then and chock the frount up would it be safe to do 30mph im just thinking of air flow as there wont be any.

[Bobbit]

Why are you looking to jack it up and do 30mph? In principle it sounds a dangerous idea and there may be an easier way if we know your thinking.

[brundish24]

my speedo gauge is not reading the correct speed my pfc reads for example 30mph and so does my sat nav but the speedo reads 20-25mph so i have to do 40mph on the speedo to do 30mph onthe pfc and sat nav.

ive tried taking the needle of and replacing it with the ignition on but its still the same, obviously it got a mph converter on it and thought that it might be the problem?

[RobMatthews]

has it been fitted with a speedo converter? if not its still reading km!

and cant you just use the sat nav for your speedo?

[brundish24]

yes it has got a speedo converter but would it be a mot fail it just seems to always be 10mph wrong but its easyer to look at the speedo.

[TRex]

Go for it once you feel comfortable thats it\'s steady and stable enough..
You\'ll be in the Car anyways so if you feel it may be getting unsteady then just back off and you could quite easily clutch in and brakes on... ....simples...

Although I\'m still not sure what you are trying to achieve.

[redgti]

mot don\'t test the speedo as far as i am aware. I have run acouple of car on axle stands (when i was much younger and silly) nothing happened i would think as long as the car is off the floor and stays off the floor it will be ok.
 
However if it comes off the stands and shoots you, back to the future style in to the wall, i didn\'t say it was ok.

[brundish24]

my plan is to do 30mph and ajust the needle on the speedo to match it one thing witch i dont understand is that the pfc read out give the correct mph but displays it in kph how does it know to do that would it know about the speed converter.

[rx-dave]

I\'ve had this problem, i had a Jap import car fitted with a UK speedo and a speedo convertor that slowed down the speedo :confused:  I just removed the convertor and problem solved!!

[RobMatthews]

I\'ve never heard of someone just pulling the nedle off and glueing it back on!

jst leave it and use the pfc or satnav, you know roughly how fast your going by the speedo just glance at the sat nav or pfc now and again.

iirc in my last rx7 it overread 165mph was 158mph on the sat nav

[shaunwil]

There is an adjustable converter available for motorbikes that has been fit before. Kev yorks had one fit in his first Cosmo !

Shaun

[brundish24]

I\'ve never heard of someone just pulling the nedle off and glueing it back on!

jst leave it and use the pfc or satnav, you know roughly how fast your going by the speedo just glance at the sat nav or pfc now and again.

iirc in my last rx7 it overread 165mph was 158mph on the sat nav

yeah but its just one of them things that slowly irritate you i see how i get on.

[RXSpeedy]

Ive got a similar problem my speedo says 26mph my pfc reads 26mph yet my car is stationary lol, only happens when i fit my pfc. Hope you get it sorted soon, also did you receive the SMIC yet? as i sent it Thursday eve.