Sooty Front Rotor Spark Plugs & Clean Rears??

Started by rx-dave, August 12, 2010, 12:53:20 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rx-dave

Just removed the plugs from a poorly running FD3S, the front rotor plugs were a bit sooty and black but the rears were really clean........any ideas??

BlitzBoy

is the engine stock? does it sound like a tractor, the boost fluctuating in vacuum,could indicate a chipped apex seal

Would change the plugs first to see if this cures, then check the coil leads and then the coil packs themselves
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

rx-dave

Yes it\'s a stock engine that hasn\'t run for a couple of years i believe. I tow started it on the weekend and it started pretty quickly but i had to keep blipping the throttle to keep it running as it wouldn\'t idle.
Took out the plugs today but i didn\'t get to try to start it as the starter has been burned out :2Rolleyes. Will see if she fires up then try the leads then coils but i suppose a compression test would be easier.........once i\'ve changed the starter :Giggle.

ashc