Which Tuner to map my car.

[karl_tate]

keep us updated with how things go and who you go to.

got any pics of the car?? should bring it to jap north east meet on sunday if its road worthy.

[Hammer]

1.28 ar back end. With a twinfire aswell. I also have a fc coil I can put on aswell if needed.

Wi is post turbo at the moment, but planning on running post and pre turbo. Should be easy to do.

[turbotoaster]

good lad, sound like its doable, make sure you fit decent plugs and yes fit that fc coil, with an fc coil and twin power ive seen 23psi and 550cc of water fire ok, but that was on its limit....and that was also pre turbo w/i.......i would just purely stay pre turbo, if you go post intercooler you will struggle to fire that much water with twin power.

Go pre turbo 550cc its been proven to work for 1.5bar of boost with your setup.

also intercooler setup?

[Hammer]

Greddy front mount at the moment.
I fancy trying pre and post turbo wi, if it\'s .... then I can take some extra wi jets with me so it\'s just pre turbo.

It\'s worth ago and means I get benefit of both pre and post cooling.

That should be twinpower not twinfire lol

[turbotoaster]

dont get me wrong, post is a good idea, but remember it puts alot more strain on your ignition system, maybe try 300cc pre and 300cc post, that way the pre will take alot of heat out of the turbo and maybe drop down to 150cc by the time it joins up with the post jet so will keep the ignition firing.

Have a read of these 2 threads, you might have already read them though im guessing. some good info in there

http://www.rx7club.com/showthread.php?t=807016

that one above is pretty much the same size turbo and spec as you so should be a direct comparison

the one below is at the extreme end but good reading

http://www.rx7club.com/showthread.php?t=863250

[Hammer]

I have had a read through them already, good threads but will read through them again.

[scratchies]

is your car blue with gold wheels

Very big street port
Gt4088r
8.5cr rotors
850 and 1600 injectors
Water Injection
PFC
Apexi BNR fuel pump
 
500 at the wheels is what i am looking for.

[JamietypeR]

I\'ve heard alot of good things about Jaydee that\'s who I\'m planning on getting my car tuned by

[lee mills]

I\'ve heard alot of good things about Jaydee that\'s who I\'m planning on getting my car tuned by

 
+1 Jaydee knows his stuff:yes Has mapped mine to 1.5 bar runs sweet as a nut and although i have no dyno print to prove im gonna hazard a guess that its running about 550rwhp:Thumbsup!

[turbotoaster]

whats your best terminal speed at pod, that will give us an idea of your power lee.

ah it makes sense now, Hammer bought that blue one, hence the spec is the same

[lee mills]

whats your best terminal speed at pod, that will give us an idea of your power lee.
 
Havent had a chance to get up there this year:mad: to busy with work. Although car was 450rwhp@ .9 bar so i think my guess shouldnt be far out:Thumbs-up

[Hammer]

yea bought the blue car with gold wheels.
 
was running 530ish flywheel power, but the engine was a pile of .....
 
Rebuilt it myself and reported the inlet and exhaust, then sorted the engine with low comp rotors and good seals.
Just ran it in and its 10x times better than it was, boost comes on strong at low rpm since i have done a bit of research on porting and done it right this time. But I am limited to 4000rpm at the moment since it isnt mapped correctly.
Good thing is it is running rich at the moment but this needs to be changed and mapped right.
 
I have changed alot on the car in the last few months, its something special now.
 
story was he built the engine, and when I took it apart it was one of the worse port jobs I have seen.  The engine wasnt the best.
I had a Judge ITO porting template for a previous build and used that to sort the porting, re-freshed the plates and used another another good set of housings and ported them.
Rotors are T2 8.5cr with mazda side and coner seals, and unbreakable apex seals.
New clutch to take the power it will be running.

[scratchies]

did you trade another car or buy in out right coz i herd that wgt had built it again coz the guy that had it ran lean coz it wasnt map and it went pop
 
 
 after all jas builds and maps my car and its run 1.5 bar last time it was put on rollers it made 437whp at 5600 didnt run all the way coz the wastegate fail

[Hammer]

It was advertised as being built by jaydee, but who knows.
Anyway whoever built it needs a slap.

But if jaydee can map it and he is good I will give him a chance.

[rbs14a]

i may be wrong but i was led to believe ross learnt alot of his mapping from jaydee??? for that boost on w.i. they are the guys to go to, as mark said you need to look at your fuel system