biggest brakes behind 18 inch wheels

Started by rx jamie, June 16, 2010, 04:12:37 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rx jamie

does anyone know what the biggest sized brake rotor that can fit behind 18 inch alloys on an fd?

SiH

Totally depends on the wheel - some have more than others.
Some brakes also require less clearance.
So basically, say what wheels you want to try and what brakes you want to try.

shaunwil

lol, I\'ve got 356mm 8 pot K-sport under 17in Team dynamics Pro-race 1.2. I had to get a custom offset as supplied by Team dynamics but they look fab !

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

francovel3

Quote from: shaunwil;699840lol, I\'ve got 356mm 8 pot K-sport under 17in Team dynamics Pro-race 1.2. I had to get a custom offset as supplied by Team dynamics but they look fab !

Shaun

any pics please?
POWER GAINS

shaunwil

1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

francovel3

Quote from: shaunwil;699890Not the best image :



Shaun

damn there big are those with the standard pads if so are they any good?
POWER GAINS

shaunwil

They are with standard pads but I\'m using a split bias system without the ABS and Vac Assist. I will probably be going for better pads but have only really just bedded them in and haven\'t fine tuned the bias bar. Plus its now press the pedal as hard as you can till they lock up :Giggle Still getting used to them really.

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

countzero1971

#7
not sure about an FD but i\'m running K-sport 8 pots with 356 discs on the RX8 with 18x8.5 wheels

as for pads I\'m using Ferodo DS2500

Never send a ferret to do a weasel's job

Mazda history
2002 323F Sport (gone)
2009 Mazda 3 Sport diesel (gone) https://flic.kr/p/ekYymb
2004 RX8 (gone) https://flic.kr/p/GJhkUf
1999 MX5 https://flic.kr/s/aHskcj62uT
2016 Mazda 3 Sport Black [url]https://flic.kr/s/aHs

TonyC

360x32 6 pots underneath team dynamic pro race 1.2. Good wheel for clearence. 4 pot rear brake kit also availble.
[SIGPIC][/SIGPIC]
Original build hours:364. Prep for Season 2: 39 hours. Follow the build: Here
Next race: TBC Contact me on Mazda 13B Racing
Follow me for \'as it happens\' updates at //www.twitter.com/MazdaGT500

francovel3

just bought a set from ksport today i went for the 8pot 330ml kit with black calipers, which brake fluid oil do you guys recomend using?
POWER GAINS

saalro

Quote from: shaunwil;699890Not the best image :
 

 
Shaun

Hi Shaun, what ET are your Pro Race 1.2 that fit over your K-sports 356, i also have the 356 8 pot kit and would love some 17" to go over them.
 
Also what width are the wheels?
 
Thanks a lot.
Sam

shaunwil

Just checked my emails from the technical info I got from Rismstock. On those wheels (Prorace 1.2) the fronts are 17x8in et33 to fit those brakes.

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

shaunwil

Just as a disclaimer, that offset may not work with other wheels. The Prorace have huge amounts of space inside them.

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

saalro

Thanks buddy, really tempted to order some :chat

How did you work out what ET to get to fit the brakes or was it luck?

Anymore photographs?

Thanks
Sam

tinker-27



380mm ap GT spec 6 pots behind 18" rotas,