Caliper repair kit for front of EGI??

Started by MrHanky, April 04, 2010, 03:51:58 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

MrHanky

Hi,
 
Just wondering if you can get caliper repair kits from anywhere in the UK?  I have noticed on other threads that you can order from rockauto, but unfortunately I need to get some before next weekend as I am doing a trackday at Mallory on Saturday.  
 
Thanks
 
Mark


MrHanky

Thanks very much, do you happen to know if it contains the caliper pins?  If not I will give them a call tomorrow.
Thanks again
 
Mark
 
 
 
Quote from: papercutout;684573Here you are fella:
 
http://www.biggred.co.uk/mazdashop.html

papercutout


Prof

Quote from: MrHanky;684671Thanks very much, do you happen to know if it contains the caliper pins? If not I will give them a call tomorrow.
Thanks again
 
Mark

The set I got was rubber parts, dust seals and the metal clips to hold them on - they don\'t provide any pins
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


MrHanky

Doh!  thanks anyway guys.  The pins are the bits I need :(
I will give them a call to see if they can supply these.
 
Thanks
 
Mark

dthebuk

these front or rear callipers?

if theyre fronts you could pick up some fd ones and rebuild them. just a thought


\'91 FC TII - Drifter... Under construction :D
:burnout

MrHanky

Quote from: dthebuk;684753these front or rear callipers?
 
if theyre fronts you could pick up some fd ones and rebuild them. just a thought

Fronts.  Are they the same then?  Or just same sort of size?
 
Thanks
 
Mark

dthebuk

same in terms of performance and size (they take the same pads).

though they\'re less likely to seize and slightly easier to work with


\'91 FC TII - Drifter... Under construction :D
:burnout

MrHanky

Quote from: dthebuk;684780same in terms of performance and size (they take the same pads).
 
though they\'re less likely to seize and slightly easier to work with

Brilliant, thanks for the advice.  Will see what I can get hold of tomorrow.
 
Mark

MrHanky

Checked with my local Mazda dealer and he can supply the pins (hopefully correct ones).  Should be here in a few days, so will see then.  Really need these to be correct, or I doubt I will get the new pads on for Mallory :(
 
Thanks for the help
 
Mark