Jacking the car up

Started by MintyFresh, May 10, 2004, 09:37:35 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

MintyFresh

This may sound like a stupid question, but how do you guys with low cars and bodykits jack it up?

I intend on fitting my neons :D  today, and as far as i can see its gonna involve driving up some bricks.

Is this how you guys do it?  a quick response will be appreciated.

grinder

use the mazda jack !!

its very low and works well

failing this - i drive mine onto a pile of bricks first :)

just becareful jacking it up - i just put the jack thru the sill on mine - and then found/made another 4 holes - so thats 5 intotal - not impressed

all i was trying to do was check a wheel bearing :(


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

MintyFresh

cheers mate, bricks it is!

Archbish

If you jack up the front-side jack point with the mazda jack, you can get the trolley jack under the rear-side jacking point.  You can then jack to your hearts content without a fear in your heart.

Which neons have you gone for??  I fitted mine on saturday...
Everyone wants to be like ArchBish,
Cos the Bish is never glum.
Its hard to be unhappy
when the sun shines out your bum

MintyFresh

Ive got a UFO LED kit.  Where did you fix them to the car? Do you have any pics to point me in the right direction?

Cheers

Archbish

wow - the UFO one!!!  Couldn\'t quite justify the cost (although I went through a lot of internal wrangling!!).  Mine is the 1000 colour one... (varox or something?)

If you pull the rear seats out, you\'ll find a rubber grommet on each side with about 12mm diameter hole.  That leads directly out just above the start of the rear suspension.
The two side ones are butted up against the sills, out of sight (so no ugly lightbulb showing), and feed straight in through there.
The rear one is up inside the bumper , runs over the rear transmission, down to the same hole and up into the cabin.  The front on is behind the splitter, goes into the undertray, zip-tied along the inside of the cable protector, and up through one of the holes into the cabin.  I\'ve taken feeds from the amp power supply and earth, and it all seems to work really well...

No pics I\'m afraid, but 1 warning - when you drill through the floor, it does go straight into the cabin, so the supplied screws may be far too long.  It\'s not double skinned like most cars...
Everyone wants to be like ArchBish,
Cos the Bish is never glum.
Its hard to be unhappy
when the sun shines out your bum

MintyFresh

Ok, excellent advice bish.

Ive got the rear seats out already, so should be pretty easy.  Im not looking forward to drilling through the rex, what did you do about the screws going into the cabin?

Archbish

yay - see I can do technical...!!! *grin*

I used shorter screws and put rubber plugs on the inside.  Probably excessive, but if I didn\'t I would injure myself at some point in the future... :rolleyes:

Out of curiousity, what are the fixings like?  The varox ones were terrible - little clips and zip ties!!  I\'ve changed it cos I had no faith in what they supplied...!!  Those UFOs look like some classy gear - are you getting the spots or floods for the interior?
Everyone wants to be like ArchBish,
Cos the Bish is never glum.
Its hard to be unhappy
when the sun shines out your bum

MintyFresh

the UFO fixings are similar.  

I have got light wire and some other LED neons for th interior, not the spots or floods.

Are you happy with the effect the neons have?  I thought the price of the UFO\'s was excessive too, but they did what i wanted and im stupid :D

Archbish

I had neons on there before, but they were damaged during the HOOOJ floods last year...

The LEDs look great, and I am pleased with them.  What\'s great is the way people slate them, then see them and are grudgingly won over!  (at least it isn\'t on a nova/scort/323...)

The UFO\'s do look cool, and I think they\'ll be brighter than the Varad tubes I\'ve got.  Was seriously tempted by the floods and spots too tho...

I got the Varads, as they let you set the colour you want, so it\'ll go better with the body colour.
Everyone wants to be like ArchBish,
Cos the Bish is never glum.
Its hard to be unhappy
when the sun shines out your bum

Andyp

I got these rhino ramps from Halfords. Bout £15 do the job real well as there\'s no way you can get a jack under mine :(

The Beatles were prats.."Money can\'t buy me lovveeee".. utter rubbish. You can buy love here

Buy my car foo! :D

MintyFresh

what are those ramps made of?  they dont look too strong.

Andyp

heavy duty plastic dude and they can hold up to 8 tonnes according to the packet hehe. Use mine every time I go and have my tyres done, the tyre places loves them :D
The Beatles were prats.."Money can\'t buy me lovveeee".. utter rubbish. You can buy love here

Buy my car foo! :D

MintyFresh

excellent, might go look for them myself :)

yonner

pics of le neons :cool  plz?
when your life is a mess light one more ciggaret its so logical!