Best Location for Fuel Pressure Regulator

[C J R]

Sice buying the RX I have not been happy with the location of the fuel pressure regulator.
It was left hanging in the space between the bulkhead and UIM. I fastened it to the brake pipes with tie wraps !! (I know not the best thing to do).
 
(Picture of current location attached.)
 
Now I am ready to relocate it, but where to ?
Is it best located as near to the injectors as possible ?
 
I understand its a pressurised fuel system, but can the regulator be mounted below the injector height anywhere in the engine bay ?
 
Can it be located in any plane, (ie with the gauge face pointing upwards) ?
 
Any advice appreciated.
 
Thanks
Chris

[lee mills]

Mines mounted on a bracket attached to the bulkhead in between the elbow and abs unit hth

[C J R]

Mines mounted on a bracket attached to the bulkhead in between the elbow and abs unit hth

 
Thanks Lee.
 
Now I have space without the ABS unit, I planned to locate it on a bracket off the bulkhead. Sounds like it will be in a similar location to yours.

[m1tch]

Or you could mount it in front of the engine if you have a lot of fuel rails and have no space either side of the engine :rollin