a little help please guys

[the hat]

picked up the fc on thursday night and im completely in love but have some questions
 
1. wipers dont park correctly and intermittent setting does not work correctly?
 
2.passenger headlight does not retract back down checked relay and is ok also replaced motor but still not joy?
 
3.it has an open diff was gona weld it but is there any other options for an lsd apart from an expensive 1.5/2 wa?
 
4.can anyone copy the ecu pin out for the ecu for an 89 fc3s turbo 2 so i can fit my avcr?
 
5.what would be the next step in tuning current spec is street ported rebuilt egine full exhaust system induction kit rats nest removed all other non required gubbins removed as far as i can see?
 
6.what are the optionsfor a rev limiter as im terrified of over revving it while sideways can a bee-r rev limiter fit?
 
thanks for any help folks

[grinder]

hiya

the wiper problem - yeah thats really common - if you search the web - you can replace one of the relays inside it to fix the speed issue - mine only works on one speed - but its fine for the MOT

the passenger headlight - hum mm thats an interesting one - i had a problem with mine and i just ended up winding it up and down manually about 10 times and from then on its been fine

the ecu pin out ... errrrrrrrrrr....im sure i have seen it on the site somewhere... i just have NO idea where .. sorry

depending on what ECU you have in the car - it will have a rev limiter - so i wouldnt worry about the

[m1tch]

Here is the writeup to fix the wipers:

http://fc3spro.com/TECH/HOWTO/WIPER/wiper.html

I think prof has a problem with his popups as well

You can fit an FD torsion diff straight into the FC housing

Here is a bit of help with the AVCR:

http://www.fd3s.net/avc-r_install.html

I have pdf manuals for the AVC-R as I have one fitted to my car already if you let me know your email address I will send those to you

[TiddlesRX7]

You can fit an FD diff into a FC housing apparently. If you do a search on here you should find some info on it.
Try this for the ecu diagram.
http://www.rotaryart.uk.com/acatalog/19912ndGenS5wiringLHD.pdf

[TiddlesRX7]

This is a really helpfull link too.
http://www.cochran-racing.com/FSM/s5/

[the hat]

ok cheers guys mitch my email is the_hat1984@hotmail.co.uk
 
and the rev limiter i just seem to have a buzzer that sounds andno limiter i dot want to go that far into the redline to find out can a bee-r liiter fit as i have one of thse lying around

[the hat]

also has anyone repaired the wiper switch this way i feel i may make things a lot worse lol

[TiddlesRX7]

I managed to get hold of a second hand wiper unit as mine had the same problem. I don\'t think its that hard to do but if you can get a whole unit its even easier.
As for the rev limmiter. Mine revs to about 8K and the buzzer comes on at 7K. Now I have been told that you should regularly (like every time!) red line the rotary engine to clear build up from inside the engine. How true this is i\'m not sure, but I do do it and it makes me smile nothing has gone bang yet (famous last words!) so I wouldn\'t worry about it too much. Just dont runn it at red line for long as with any engine I suppose.

[Bobbit]

yep, as they say "A red line a day keeps the carbon way" The rotary engine loves to be rev\'d so dont be shy in taking it to the limiter. Plus you may get some flames too!

[the hat]

ok cheers folks how do i remove the annoying buzzer then where is it located

[m1tch]

ok cheers guys mitch my email is the_hat1984@hotmail.co.uk
 
and the rev limiter i just seem to have a buzzer that sounds andno limiter i dot want to go that far into the redline to find out can a bee-r liiter fit as i have one of thse lying around

My 1991 turbo II had this as well, the buzzer goes off, but there is no fuel cut or anything lol you don\'t need to rev it past about 7 anyhow, I found my max power was at 6800 anything more and you would need underdrive pulleys so the waterpump doesn\'t cavitate

I will send you the manauls

[L18M]

buzzer is on the instrment cluster on the inside.
if u take out the cluster then its behind the fuel gauge area.
its those cheap nasty school physics sound buzzer things.. very anoying..
come think of it.. anyone got a *ding dong* sound like in initial d..? hehe

[m1tch]

buzzer is on the instrment cluster on the inside.
if u take out the cluster then its behind the fuel gauge area.
its those cheap nasty school physics sound buzzer things.. very anoying..
come think of it.. anyone got a *ding dong* sound like in initial d..? hehe

Or perhaps lets off a party horn and then the dash flashes like disco lights? yes yes? :Party

[mukumu kurubushi]

Or perhaps lets off a party horn and then the dash flashes like disco lights? yes yes? :Party

hahahaha that would be awesome . with 3 frame animated dancing girls. "CHANGE GEAR NOW!!!! SUPER BATTLE WIINNNN!!!!!!"

[the hat]

yes i understand the no need to rev the car that high but when your sideways your not really paying that much attention to how high the revs go