EGI & TurboII exhaust veiws please.

[grinder]

thats no probs to be honest

im sure pete must have a full exhaust somewhere - or Adrain ( tiddles ?? ) he has a spare TII - but not sure how much of the exhaust is left on it ?

[Ricco_04]

I have a full stock system! I can take measurements from (UK TII,  I will be reusing it though so cant let it go!)

Do I get a Brucey bonus? :Giggle

[Brett]

I\'ve sent at least 3 to the scrap yard :p

[pdtaylor18]

Sorry i only have stock cats, no other bits but shame you could not copy the 3" exhaust on my car (twins) but its just timing etc, might be able to work something out though.

[TiddlesRX7]

I\'ve got the down pipe/expantion chamber the Y piece and two rear cans. Stu/Grinder you have the CAT from this system. The two rear cans have been cut off but its all still there as such. If its any good to you then you can have it to make a jig from. I could do with the  rear cans back though as I was gonna Ebay them at some point (no rush though).

[jm-garage.co.uk]

from what i can see having had alook a guys FC over the weekend the from the Y section back are the same on the EGI as they are in the TII aside from diameter.
 
So if i can arrange a for a TII downpipe back to the y section i would be greatfull and we can then get one mocked up and have alook where we are.

[TiddlesRX7]

Am I right in thinking that the exhaust is in 4 pieces. Down pipe, CAT, Y section then the rear boxes. If so then You can have my down pipe and CAT (as long as I can get it back of Grinder). Its just getting it to you as I\'m oop north and its a bit of a trek to you guys!

[jm-garage.co.uk]

Am I right in thinking that the exhaust is in 4 pieces. Down pipe, CAT, Y section then the rear boxes. If so then You can have my down pipe and CAT (as long as I can get it back of Grinder). Its just getting it to you as I\'m oop north and its a bit of a trek to you guys!

I\'d get a our courior to pick it up and bring it to us. Much easier that way. Yeah i need the down pipe back to the Y section.

[grinder]

actually its 5 peices i think

1 - down pipe
2 - a bit between this and the cat
3 - cat
4 - Y pipe
5 - back boxes

i have ade\'s centre cat and i have a stock down pipe aswell - so if you can get a courier for these - thats 2 peices sorted out ( i will just need them back at some point - but im happy to pay if you will make me a centre decat pipe )

Stu

[TiddlesRX7]

Ah I don\'t think I have the piece between the down pipe and the CAT

[grinder]

i know that i dont

i suppose its how you are gonna make a jog for all this ??

is the plan to just bolt it all together on a bench and copy it ?

[jm-garage.co.uk]

i know that i dont
 
i suppose its how you are gonna make a jog for all this ??
 
is the plan to just bolt it all together on a bench and copy it ?

To a degree yes. mainly for hanger/flange position. Then CAD input flow analyzed between stock & my design. Build it test it.

[grinder]

ah right - if thats the case then - you will need all the parts

[jm-garage.co.uk]

ah right - if thats the case then - you will need all the parts

As i said before the pipe layout is the same y-piece back so its just the diameter that changes. I have the details on that so its just the down pipe to the y-pipe i need as before i can model them.

[grinder]

if thats the case - then the only peice you are missing is the bit from the down pipe to the cat

if you look at the pic i posted - its the first piece on the right hand side of the pic

i suppose if you can mock it up on a car ( somehow ) then you could work out the lengh/angle of the pipe you need

OR

you make the 3 peices into 1 to save hassle ( and thus giving the UK owners a chance to remove both cats in one hit )