fd power fc to a fc

flatout · January 25, 2009, 01:27:38 PM

will a fd power fc fit fit a fc, i think you can get a harness to make it fit but is it that simple,thanx for any info

pdtaylor18 · January 25, 2009, 01:49:02 PM

yes it will fit with a harness but the PFC must be an early version ie pre \'95. Harness you will need and also you have to have an FD ignitor and a few other items. Go to Banzai Racing\'s site in USA and see what they sell and what you need. It will work out more expemsive overall than a Microtech or similar but if you can source the items cheaply enough then its worth doing.

http://www.banzai-racing.com/

dam good site as well and very imformative.

You could be clever to make the add on bits, one reason why I keep the harnesses and connectors from my scrappers, already have the ignitor or spare coil pack to mod. The harness to the ECU will be the biggy but could be done yourself but for the cost of the whole package its just as wise to buy the whole lot.

L18M · January 25, 2009, 02:19:04 PM

or if u ask me nicely i can point u in the general direction of a fren who can source pfc for fc for u. but can take some time.

flatout · January 25, 2009, 02:45:53 PM

thanxs Pete for that info, BBCFC can you point me in the direction, i dont mind waiting,car wont be finshed for a long time yet,

L18M · January 25, 2009, 07:33:27 PM

Email me.
W.liam.li@gmail.com
I tried 2get hold of u a few weeks back bout a cf hood. think u had one for sale, Dunt matter nw, i found one

C-Rex · January 25, 2009, 07:46:13 PM

Have a FD PFC in my FC Rory if you want to take a look at it some day?

Paul

flatout · January 25, 2009, 08:12:52 PM

cheers paul, i will defo try and get a look this week,mad to see that fc in the flesh

flatout · January 25, 2009, 08:16:02 PM

BBCFC no i didnt have one for sale,bought one from Pete do,

C-Rex · January 25, 2009, 10:20:24 PM

Oh and also could be worth calling in to McNamaras. He\'s fully building his FC now too FD PFC, V mounting etc

richrx · January 27, 2009, 12:44:34 PM

Quote from: C-Rex;578306Have a FD PFC in my FC Rory if you want to take a look at it some day?

Paul

was this easy enough to do? im seriously considering it. did you use the banzai racing harness?

richard

C-Rex · January 27, 2009, 03:57:27 PM

Dont have a clue man my car came like that from japan

pdtaylor18 · January 27, 2009, 07:39:15 PM

I would imagine its the FC specific PFC if it came from Japan like it.

m1tch · January 27, 2009, 07:43:47 PM

You can get FC power FCs for about Â£600, there are other ECU routes etc e-manage that can be done on the FC that might give better results anyhow

C-Rex · January 27, 2009, 09:44:04 PM

Quote from: pdtaylor18;578970I would imagine its the FC specific PFC if it came from Japan like it.

On a second inspection by Rory (flatout) it seems to be FC specific alright

richrx · January 28, 2009, 02:36:59 AM

im assuming theres no specific greddy e-manage for the fc, there all the same unit, just a harness is needed to connect it to the fc?

im still thinking the pfc is the best bet. i read somewhere 40bhp is possible with the ecu and a good map alone without any extra mods :god

but a cheap e-manage would be tempting!

richard