Main table of 1/4 mile times and mph\'s for European rotors!

Started by Glenn Butcher, January 26, 2004, 01:08:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

davegttph1

I did a 13.42 on standard street tyres  on stock twins if that can be added please :D

Rixio

13.02s @ 112mph, street tyres & stock twins :D

John Yorke

Quote from: antnicuk12.2 at 119.4 at RS3,  
Ported Turbo II FC with GT35/40  Full fat and fully dressed interior
built by me tuned by reworx

Bit sluggish wernt you ;) ???

Good time Ant, reading about it aint the same as being there still plenty of other meets comming up.

antnicuk

Cheers John,
Shame i only managed one run but it was worth the 15 quid. pitty you couldnt be there,  we will have to meet up at the next essex meet.
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!


Glenn Butcher

Hi all,  I\'ll try and get one of the moderators to to update the table (might just put it into Excel to make it easier to update).
Thanks,

BlitzBoy

nice one Glenn, be good to see my recently deceased Rexy be remembered for its 12.3@120 on street tyres on the table, bit like an Obiturary lol
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

grinder

hiya chaps :D

looks like im gonna be updating the table ... this could be fun !! LOL

it will take me a few days to get my head around it so bear with me ( i will also clean this thread whilst im at it )

and i will also be adding a template for you guys to use to make my job a TAD easier :D :D

Ta

Stu


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

20B_boy

R.

royal

#248
Right o, had a great day at Santa Pod today and had my first go at drag racing. Good to meet some of you , hope you all had a good day. Heres my times for today. I\'ve never done it before so I took it pretty easy boost setting wise and revs. I\'m not very at home with high revs on the launch. I was only revving to about 3-3.5krpm which was definately too low. The first run was done in the lowest boost setting, second in second boost setting and third run in third boost setting (1 bar I think but need to confirm with John Y?). I didn\'t try the high boost setting as my technique was very poor and I didn\'t want to end up in the concrete on my first day! I spoke with a few Pod regulars about the time and they reckon it shows my technique to be very novice and the car to be very promising as I still got a 12.9 with such a poor start. I\'m chuffed with it , just need to learn to launch better and hopefully I\'ll get some very good scores. What do you guys think?

        
reaction___   +1.487      ___+2.220    ___  + 1.583   
60ft______   3.395   ___   2.734   ___   2.394
330ft   __     ___7.396   ___   6.513   ___   5.928
1/8 ET      ____  10.519   ___   9.325   ___   8.632
1/8 mph         ___78.26   ___   88.08   ___   94.55
1000\' ET      ___13.135   ___   11.657   ___   10.909
1/4 ET         ___15.454   ___    13.703   ___   12.914
1/4 mph        ___ 96.51   ___   115.14   ___   116.94

ps - I purposely didn\'t go at the light, needed to work on my start more than my reaction!

BlitzBoy

"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

royal

Stripy broke, the dragon car ran though. I didn\'t get the times I\'m afraid. The first run didn\'t really happen, the second run was a bit snakey (!) in the tens I think , but may be wrong. Impressive cars in the flesh. First time I\'ve seen them. The jet car was mental!

20B_boy

#251
Ross ran a best of 10.17 I think, was having some selection/learning curve issues with his dog box which prevented him breaking into the 9s :o I think the \'box broke in the end?

Stripey\'s \'very used parts bin\'-engine turned out to be a bit far gone lol, it was \'run in\' during the burnout I think and inspite of a great 90ft called it a day early :Grrr

RE:Worx and Dragon shared hotel and dining facilities on saturday night which made for a rather entertaining evening with lots of rather amusing banter :Giggle

Top $ in spite of our issues :wave

R.
R.

Kash_

nice time you got Royal, not bad for your first ever run... :) ... I found a 0-60 calculator and according to your last run your 0-60 is 3.48 :eek

http://www.wallaceracing.com/0-60_equation.php

royal

#253
Bloody hell, thats actually pretty quick isn\'t it! :) Not sure how that works out with such poor starts? or am i missing the point and being silly??

edit - almost on par with a lamborgini diablo!? Can\'t be right, I had terrible start times??

Glenn Butcher

Hi all,  finally updated the table - have put it into Excel now and are just saving as a HTML file - saves a lot of hassle to update.

But I\'m sure people will still want to add their times etc - so when a bunch go up, one of us will update again.
Thanks,