Hybrids plus my setup.. what should I expect?

Started by Jim_rx7, October 20, 2008, 06:54:24 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Jim_rx7

This is the current setup of the car...

13b-REW Engine (3000 ish miles on fresh rebuild)
HKS Twin Air Filters
Air Pump Removed
Blitz Dump Valve
APL Intercooler
Aeromotive FPR
Walbro Fuel Pump
4 x 850cc Denso Injectors
Full Non Sequential Turbo Conversion
HKS Downpipe
Re-Amemiya Centre Section
Racing Beat Back Box
Apexi Power FC Commander


But the car comes with some hybrid turbos. Standard turbos with rebuilt internals that are good for 1.3 bar.

What sorta figures should I expect if I chose to fit them?

karl_tate

it all depends how much boost you want to run/your setup can handle
____________________

Built In Japan - Built Better In The UK

XBOX GAMERS TAG --- tatey1985

Jim_rx7

Well if the turbos can run 1.3 bar, I want to run 1.3 bar. I suppose it just depends on when the fuelling side of things run out of puff?

Anyone any idea?

karl_tate

fueling will run out way before then, im no expert but i would say around 1bar with your injectors but im not sure.

would also need to upgrade a few more things as well
____________________

Built In Japan - Built Better In The UK

XBOX GAMERS TAG --- tatey1985

Jim_rx7

What else would need upgrading apart from the injectors?

Surely everything else is there already?

BenLewisMav

The only other thing to add to that would be a HKS twin spark, at least that way you should have no problems with ignition breakup at the top end.

BlitzBoy

you can up the fuel line pressure to give you a bit more fuel, even with uprated internals they will be producing more heat then power past 1.1 BAR.
I know BNRs or Knightsports had bigger wheels, are your twins any of these makes?
at 1 BAR you may get 340bhp at the wheels depends on the porting of your engine as well, you need a twin spark really past 1 BAR
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark