Torque Developments International - Essex

[yehreally]

Has anyone used this company and what were your experiences, bills like and results in terms of bhp, for your hard earned cash :Talking1 ?
 

http://www.tdi-plc.com/catalog/index.php

[scratchies]

a friend of mine had his gt35 skykine built there but they dont do rotary or they didn\'t (mapping) they have a good rep but you do pay them well for it

[BlitzBoy]

very very very expensive, they did my 300zx 10 years ago, they only fitted a chip and dump valve cost me a 1000, not rotary tuners, so go elsewhere i say

[yehreally]

schweet cars :mmmm but, looking for RX7 tuning results and says here under stage three that they map HKS F Con ecu :
 
http://www.tdi-plc.com/catalog/index.php?cPath=107_401_415_587
 
anyone have hourly tuning rates and also saw a thread advising 10% off for MRC club members in 2005 does this still apply ?

[royal]

I know of people who use them and they have a very good professional reputation. They are expensive, but its more through being so good at what they do and being able to charge more because of it.

[clive]

I have worked with TDI for 6 years through my business and we supply each other in both directions with custom and information.

They have actually successfully tuned lots of Rotaries over the years right back to the early 90\'s and now at their purpose built Lakeside premises they have probably the best Dyno facilities in the U/K.

They will openly tell you that are not lovers of the Apexi PFC on these cars and that they prefer tuning cars with F-Con or Motec ECU\'s on our cars

As Mark says the only real criticism you will hear is that they are expensive

Hope this helps

[Timmy]

Got there spec worng for fd\'s

http://www.tdi-plc.com/catalog/index.php?cPath=107_401_415_586

[yehreally]

Any RX7 HKS ecu owners have any tuning stories ?

[yehreally]

Clive, who is your contact at TDi and do you have an email address for them ?
 
 

I have worked with TDI for 6 years through my business and we supply each other in both directions with custom and information.
 
They have actually successfully tuned lots of Rotaries over the years right back to the early 90\'s and now at their purpose built Lakeside premises they have probably the best Dyno facilities in the U/K.
 
They will openly tell you that are not lovers of the Apexi PFC on these cars and that they prefer tuning cars with F-Con or Motec ECU\'s on our cars
 
As Mark says the only real criticism you will hear is that they are expensive
 
Hope this helps

[clive]

Clive, who is your contact at TDi and do you have an email address for them ?

Probably best to mail Sam, sam@tdi-plc.com