bigger rear brakes???

Started by leeincivic, September 16, 2008, 01:08:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

leeincivic

eh up gents, quick question, a few years ago i remember my mate buyin a big brake conversion for his saxo, the kit used the original caliper but had a bigger rotor and a bracket to space the caliper out to accomodate the caliper, just wondering if anyone knows of anywhere that does these types of kit for the rears on an fd??

treated myself to a lil brake upgrade:Giggle for the fronts which are now on a plane from new zealand to me and wanted the rears to look and perform a bit more beefy!!:Tongue1

any ideas fellas? cheers
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

AtomicRex

We sell a rear brake kit that is a 320mm disc 4 pot calliper and retains the handbrake.
 
The basic kit is £919
Lines are an extra £33
We can supply pads too, depending whether you want EBC or the DS series
 
We have 2 sets in black at the moment....with some cheeky 360mm 6 pots to go up front too!

Tim_B

Quote from: AtomicRex;537604We sell a rear brake kit that is a 320mm disc 4 pot calliper and retains the handbrake.
 
The basic kit is £919
Lines are an extra £33
We can supply pads too, depending whether you want EBC or the DS series
 
We have 2 sets in black at the moment....with some cheeky 360mm 6 pots to go up front too!

I\'d be tempted by that. What make are they? Is it a straightforward replacement - or might it catch the wheels?

Timmy

You could fit rz rear brakes.

leeincivic

Quote from: Timmy;537836You could fit rz rear brakes.

are they a bigger brake?

i was after something on the cheaper side than replacing the caliper and that for now ya see, cheers for the info tho atomic
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

Timmy

Yeh they\'re massive Barely fit under 17" wheels. I think they\'re 330mm.

leeincivic

honest!!! might have a butchers for some than cheers mate
:god
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

RobMatthews

They are 315 mm i know i\'ve just measured the set that is sat in my garage-did i mention they are coming up for sale?just need to research how much they are worth.They will need new disks though.
To contact me robmatthews81@yahoo.co.uk

parts supplied by;

DM-Motorsport.co.uk
Pulleys, Filler Caps, Sump braces, wheel spacers, blank plates and more!...............
Info@DM-Motorsport.co.uk

leeincivic

:WaveBye hello i want em!!! haha let me know when ya sellin em dude and will see if the budget can accomodate? lol
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

RobMatthews

make me an offer the callipers are painted red and in good working condition as said befor the disks will need replacing as one has a crack in.
To contact me robmatthews81@yahoo.co.uk

parts supplied by;

DM-Motorsport.co.uk
Pulleys, Filler Caps, Sump braces, wheel spacers, blank plates and more!...............
Info@DM-Motorsport.co.uk

AtomicRex

Quote from: Tim_B;537826I\'d be tempted by that. What make are they? Is it a straightforward replacement - or might it catch the wheels?

Everything is supplied, so you receive all of the brackets etc
 
You just need to decide whether you use the goodridge hoses, and which pads you want.

mattfduk

Quote from: AtomicRex;537604We sell a rear brake kit that is a 320mm disc 4 pot calliper and retains the handbrake.
 
The basic kit is £919
Lines are an extra £33
We can supply pads too, depending whether you want EBC or the DS series
 
We have 2 sets in black at the moment....with some cheeky 360mm 6 pots to go up front too!

who makes them? and are those prices plus vat?

Ed_RX7

i think they want to know what calipers they are!
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

AtomicRex

They are made by Hispec for us.
 
I will get some photos taken tonight.
 
Yes the prices quoted are excluding VAT
 
We are going to be running them on 3 of our race cars

AtomicRex