ok, next kgparts injector question

[nikp]

right, the bosch injectors come with a electrical plug socket and the wires comming off it. obviously this needs plicing into the wiring loom. my qustion is, does it matter which way round the wires are spliced in?

[Fats]

Yes mate they have to be fitted right.

If you look at the bosch injector it will have a + and -. I think the black and yellow wire is positive 12v and negative is black, best way to check is use a test light on the standard connector with the ignition on.

Theres mixed reactions weather to or not to fit the resistors, I asked carl and he told me to leave them off

good luck

[Fats]

Yes mate they have to be fitted right.

If you look at the bosch injector it will have a + and -. I think the black and yellow wire is positive 12v and negative is black, best way to check is use a test light on the standard connector with the ignition on.

Theres mixed reactions weather to or not to fit the resistors, I asked carl and he told me to leave them off

good luck