evans cooling

hairyhoover · February 04, 2008, 09:02:46 PM

Has any body seen or used this before?

http://www.evanscooling.com/catalog/C_npg1.htm

People seem to be using this over on RX7club, it boils at 375 F at 0psi

cheers

hairyhoover · February 04, 2008, 09:20:10 PM

quote from rx7club:

The stuff is great. I was one of the very first people to actually use it through Pineapple Racing. (I\'m his test subject alot of times.) As far as costs go, i think its $20+shipping.

I beleive that Rob won\'t warrenty a 3rd gen motor without this stuff running in the car. CJ

Sidzrx · February 04, 2008, 11:07:12 PM

I use this stuff, it really is good

hairyhoover · February 05, 2008, 08:34:30 AM

where did u get it from i the uk?

FD3UK · February 05, 2008, 10:02:52 AM

I bought mine from here. Seems to have gone up though.

I run the npgR, which was advised when using electric water pump.

It is also best to change over when engine has been stripped as it does not like much water ingress.

hairyhoover · February 05, 2008, 10:08:46 AM

do you find the car runs cooler?

RemarkLima · February 05, 2008, 10:29:44 AM

And do you just replace the AST cap with an open cap?

FD3UK · February 05, 2008, 11:59:13 AM

Quotedo you find the car runs cooler?

It won\'t make car run cooler, but Evans does not boil until a much higher pressure. Pressure is induced in a water filled system to raise the boiling point of water.

QuoteAnd do you just replace the AST cap with an open cap?

I run mine at zero pressure, but my setup is far from standard. You can run a open cap on the AST or a lower pressure one. Don\'t forget you would need to clean out expansion tank an refill with Evans.

My Setup

strange_days_uk · February 05, 2008, 12:26:22 PM

Darren any update on your motor ?

hairyhoover · February 05, 2008, 01:08:55 PM

Quote from: strange_days_ukDarren any update on your motor ?

Hi Simon, my engine is going in this weekend, ive still got a few jobs to do though before its running..... ive got to make pipes intercooler/coolant pipes up for v-mount, im also relocating my battery and rewiring my fuel pump,

i also need the plastic spacer that sits underneath the primary rail whih i cant get hold of... can you help?

hairyhoover · February 05, 2008, 01:09:30 PM

have you got any more pics of your engine bay??!!?!?

FD3UK · February 06, 2008, 09:01:40 AM

Full engine bay shot...

Smifta · February 06, 2008, 10:13:46 AM

That is lovelly. Everything is in perfect positions!

hairyhoover · February 06, 2008, 11:30:47 AM

fduk, which ps pump are you using?

also where is the oil feed for the turbo coming from?

Also have you still got the cnc program for the alternator bracket

cheers

cheers

FD3UK · February 09, 2008, 09:35:43 AM

Quotefduk, which ps pump are you using?

also where is the oil feed for the turbo coming from?

Also have you still got the cnc program for the alternator bracket

I am using a citroen saxo pump, which you can just see mounted in picture.

The turbo oil feed comes from the normal exit point on front plate.

I could make a bracket, but you can buy cheaper online!!!