First FD Experience

Started by T11MNM, February 03, 2008, 12:09:13 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

T11MNM

I went out to take a look at some FD\'s at some west yorkshire importers this afternoon, i really wasn\'t hoping for much and wasn\'t disappointed. The idea of today was to go have a look at some rougher examples as a way of comparison to what my budget will stretch too.

Today was the first day i had spent any time looking over an FD of any shape or form, they are excellent looking cars in the flesh aren\'t they, way ahead of their time.

I\'m about 6\' 2 or 3 and errm it\'s a bit of a squeeze, in order for me to get my leg underneath the steering wheel of the two i saw today i had to depress the clutch, hopefully a flat bottomed steering wheel and some slight modifications to the runners will help solve this problem *crosses fingers*.

I had a short drive of one of the cars i saw today, it had synchro problems i think as trying to find a gear when coming down the box was impossible, i had to heel/toe to get it into gear, there was also a very weird vibration above 60 kph. Both of my legs were pressed hard against the steering wheel which made any sense of handling go away, I\'m sure there was more room in an MX5 i drove, perhaps it was down to the size of the steering wheel?

Now i know what a bad one feels like i hope any further cars i go and look at with a view to buy will be a whole lot better.

One thing i noticed was that either car i looked at seem to maintain much oil pressure at idle, is this normal? The car i test drove cut out as i rolled to a stop at some traffic lights and then became quite difficult to start, is this a sign of tip failure?

rx7veilside

sounds like a dog
it will be a tight squeeze i am 6ft1 -2 and i have the mazdaspeed seats slightly lower and its ok..hard to start poss bad compression

SiH

Wasn\'t Keighley Trade Centre was it?

gonzoninja

Being difficult to start could be anything...although it is almost guaranteed to be expensive. Not something you want after you have just bought a new car.

I had to have the engine rebuilt 1 month after buying mine! £10,000 in the first 2 months of ownership is a bitch. I was better spending £10,000 on an absolutely mint FD.

Walk away sunshine. If I knew what I knew now about FD\'s (which still isn\'t very much) I wouldn\'t have got my car, I would have waited until the one I wanted came up on the forum.
\'In the long-run, we\'re all dead, so you might as well own a Rex\' J.M. Keynes

skybusr34

as previously said, these cars are bad enough when they suprise you and go wrong after you`ve brought one.

don`t buy a nail thats playing up on test drive bud. loads for sale on here with history
if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

T11MNM

Maybe i didn\'t make it clear, i have no intention of buying any of the cars today, i was just curious as to what the bad ones were really like.

My intentions are to spend a good deal more money on a car that has had history of rebuild and plenty of other history.

shaunwil

The search button is your friend :Giggle

There is a mod you can do to seat runners that give you more push back on the seat for the taller guys !

Would have thought that was completly shagged ! Out of interest what where they asking for it ?

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

T11MNM

it didn\'t have a price but have just found it online for £7995, woah!

skybusr34

if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

shaunwil

The stock oil prssure gauge is naff anyway !

Could be something as simple as new oil in the gearbox to fix the dropdown in gear. Could be a shagged clutch or master/slave cylinder.

How can they ask for almost 8k ??? Beggers belief, no wonder prices are falling when people ask silly money for stuff thats knackered tarring others with the same brush.

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

T11MNM

My friend and I where both shocked at what was on offer really not just the RX7\'s but other imports.

I couldn\'t believe how much stock one place had, they had some really nice "looking" cars, but with the history they have, etc i\'d never buy anything from them. Some cars looked really really ropey.

The vacuum hoses on the RX7 i could get into (they had another and the door handle wouldn\'t open the drivers door.) were all very brittle, god only knows what they would have been like around the turbos.

They even had a Noble, Ferrari 360 and Porsche GT2 the guy obviously has a lot of money to spend on stock, why not improve the cars you are importing rather than ripping people off. The salesman/boy i dealt with couldn\'t close a door let alone a sale of a car i\'m sure of that.

matt p

Definatley Keighley mate, say no more
Why its good to do your homework of "specialists"

http://www.fduk.org/forum/showthread.php?t=28429

skybusr34

i`ve heard some bad stuff abourt that place!
if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

Dan Norton

Quote from: SiHWasn\'t Keighley Trade Centre was it?

My first thoughts as well mate :rollin :rollin


T11....have a look in the for sale section here, pick a few to go and view and make a day of it buddy.
The good ones are out there, and tend to be enthusiast owned, so you know its gonna be looked after!
Turned into the worst part of my life....my precious fd3 has gone, but never forgotten....roll on a new life!!!!

FD3SNuttah

tim,  im 6\'2" and managed to fit in a rex fine, i have a recaro seat and a flat bottomed steerin wheel and theres plenty of room.  If you wanna see what a decent TT FD is like then wait a couple of week when i got my clutch changed ill take you out for a drive.