Fd Just Will Not Start

Started by jukesr, November 04, 2007, 02:13:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jukesr

JUST THIS MORNING I WENT OUT TO GO FOR DRIVE AND MY REX DID NOT START CHEKED THE BATARY AND IT IS FINE .YESTRDAY I STARTED IT BUT ONLY HAD IT OFF THE DRIVE SO MY WIFE CUD GET HER CAR OUT
SO I GOT THE SPARK PLUGS OUT AND THAY WHER WET IS IT FLOODED!!!
AND IF SO HOW DO I GET AROWND IT...:Hammer

strange_days_uk

sounds flooded mate

search button


jukesr

just de flooded eng but it still will not start!!!:2Confused

gsb876

Might need new plugs, try to clean the ones you took out and see if it fires up ??
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle

Steve Burnett

I had this and followed the guide and it did work.
The FD does not like a short burst of life, you really need to have it running for more than a minute or so to prevent engine flooding.

jukesr

the plugs that are in r new i have give them a clean and let them dry put them back in and tryed to start it. it ticks over but will not start
thank for you help lad\'s:Giggle   i am pulling my hear out:Hammer

exige

egi guse under bonnet, behind battery

exige


jukesr

the fuse or the main relay u think it has blone

jukesr

cheked the EGI fuse and is ok can it be enythink else!! i am startig to get
abit nuveus now :Grrr

philiwily

Did you take the plugs out and the fuse and then turn the engine over before putting the plugs back in?

Phil

jukesr

yes i did but it did not start.
 i am gowing to try today and see if it starts theaks for ur help m8:cheers

nikp

Quote from: Steve BurnettThe FD does not like a short burst of life, you really need to have it running for more than a minute or so to prevent engine flooding.

Actually, that\'s not strictly true. Fresh engines are fine being started up for a few seconds. I can start mine, shut it off immediately, and it\'ll still start next time fine. Done this several times now. Not a problem.

FD3SNuttah

i reckon that once you get it going have it compression tested.