Could this be my boost problem!!!?????

[Jono FD3]

Just started to take the blowers off to get the wastgate ported..... started to pull the small feed pipes off from the blowers & pipe work & look what I found:





Basicaly, all is good & does what it\'s supesed to till it hits 5k ish on the taco.... then the boost just spikes to what ever it wants to..... Max 1.1 bar!!

[interloper393]

hehe yeah i had similar on my last one bud, i tryed to glue mine but just didnt cut it... just go non-seq

[Jono FD3]

Can\'t be arsed mate.... to much work involved!!!
I\'m bleeding enough now as it is!!!

[RobbieRX-7]

Get these http://www.mazdarotaryclub.com/forums/showthread.php?t=42027&highlight=cheap

[John_Hudson]

just go non-seq

Doooo It!!!!

[Jono FD3]

Is that all it is??? a 1 way check valve!

Think I\'ve got one up the garage!!!!

Jono

[m4drx]

try that first before going any further i have some if you need anyway mate.

check that as it is a pressurised line and is very important.

if you boost issues continue it may have alot to do with compression im afraid mate.

[Jono FD3]

I\'ll start with the cheap fix first & see how we go from there!!

Jono