Lazerline Alarm experts Help!

[maddyaddy]

Ive got a lazerline 291 cat 1 alarm system fitted and I am trying to get the central locking wired up to the alarm.  I have a 2 wire door lock actuator which needs to be connected to the alarm to lock the car but dont know what wires to connect it up to.  Your help please.  Thanks
:InLove

[RobbieRX-7]

You need to find the lock and unlock wires on the alarm unit. There should be 2 wires. You can do this by using a multimeter. Arm/disarm the alarm whilst testing with the meter. You then wire these to 2 relays, one wire for each relay. You then wire your solenoid to the relays. I wouldn\'t advise wiring the solenoid directly to the alarm without the relays, as the alarm circuitry is only low current rating, you could overload it if not using relays.