Water Seal Kit

Started by Teighto, August 09, 2007, 07:43:11 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


Grizzly

Depends if you are doing it on the cheap (cutting corners etc) if not then you want the hard Gasket kit too.

Don\'t forget you will also need new Apex\'s and i\'d say replace all the Springs too and thats just a basic rebuild, when its apart you will have to look at the wear in the rotor grooves,Plates etc so thats when it starts too add up.

Teighto

Cool im just trying to find places that sell all the neccessary parts at the moment !!!

johnf

As above, as much as you can afford whilst it\'s apart.

Try pricing from the advertising banners at the top of the page, you never know.

I know at least one of them will look at your bits and give sound advice on their condition and what need doing.

John
I started with nothing and I have most of it left

Teighto

Cool Cheers for the Replies :):)  just want to experience it for myself (rebuilding it that is !! ) im not a cheap ass otherwise i wouldnt have bought a REX !!! :D :D   and some companies dont like selling the parts unless they fit them if ya know what i mean !!!

if ya could email me with the more reputable Place it would be appreciated :)

teighto@hotmail.com

Grizzly

Basicly for your first rebuild you will need a full engine gasket kit, set of OEM Springs and a rebuild DVD for sure, Try and buy only genuine mazda parts too.

Those are the things you can buy and know you will need as you get into it you can buy a O ring set and buy a few gaskets (lower and upper Inlet etc) too cut the amount of gaskets you don\'t use down but i\'d recomend you don\'t go this way on your First build.

As for where to get your Pars from? i use RX motors (always had good service from them and they have been in the Rx world for ALONG time) another place that is quickly becoming very respected is Super7, they are also very helpfull and don\'t mind steering you in the right direction.

Teighto


adib

its perhaps a jap back half and uk front half :)

Teighto