what turbo/turbos are you using

[Revsport]

im definately a fan of those results John_Hudson.....

.....could be an option for me down the line!

[Ed_RX7]

360 ATW! Fantastic! I was proven wrong...what a result though and such a smooth curve :Thumbs-up

I think you\'ll find that that figure is at the hubs...not at the wheels
 
Still very impressive none the less:cheers

[Rixio]

Ah semantıcs shamantıcs hehe ısnt ıt only a 5hp odd dıfference? But really that ıs a fantastıc result! Cant waıt tıll ı get mıne fınıshed and dyno`d

[gmogle]

Stock twins in mine but boost uprated to 0.9 bar, happy with this but could up it a bit more as I have WI. But the car keeps up with my R32 Skyline owning friend who has 350 bhp lol

[John_Hudson]

360 ATW! Fantastic! I was proven wrong...what a result though and such a smooth curve :Thumbs-up

*cough* 369 actually, lol  :spank :Thumbs-up

[jamie_supra]

im running a T60. kicks in big time at 4500.

[Rixio]

*cough* 369 actually, lol  :spank :Thumbs-up

What other mods & fueling are you running John?

[John_Hudson]

What other mods & fueling are you running John?

Apexi GT FMIC, walbro 255l/h pump, 850\'s all around FSE RR FPR apexi intake and PFC, trust 80mm DP, mongoose 3" straight system KS rf420 non-seq modded twins and greddy profec b spec 2 controller

I did have a koyo rad but it split so had to go back to stock, but im still seeing temps of 85-87 so its no biggie..
im told the KS can take alot more boost than most, in the region of 1.4 before they start spaccing out due to shaft size so thats always nice to know, Its just a case of porting if i want to see more power..

I think thats about it, im getting tired and im pretty sure its time for bed soon!! :Typing

[REVIT93RX7]

Running stock twins at the moment but plan after rebuild to go witth 99 spec.

[monkey-fd3s]

Turbonetics 60-1

[davyv]

Turbo Technics high flow twins.

[Warthog]

T51 rules.....................

[hotstepper1973]

i have garrett gt35/40r ball bearing turbo because i wanted more power but at the same time as little lag as poss, was making 421hp 368lbft but looking forward to mapping after new engine and porting will spool up even quicker

Bb turbo\'s :rollin :mmmm :Giggle :cool

[JBerg]

Rixio, if you dont mind me asking, how much were those Border twins? I\'m looking into uprated twins myself...

Cheers

Jon

[Sy.]

I have got a T04R . Came with the car but will let you know power when i get it on the rollers after mapping soon