Coolant buzzer on all the time? (help please!)

Started by Jim_rx7, July 08, 2007, 11:32:51 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

fdracer

Quote from: Jim_rx7Ok....
 
I finally got the engine back together, in the car... all connected up and it started!! :)
 
Only thing is that the coolant buzzer and light seems to be on all the time?? We filled it up with a load of coolant. Then more, then more, then more. Must be near 7 litres or so.
 
It seems to be full and not taking anymore. The only thing is that the coolant buzzer/light seems to be on all the time.
 
I\'ve not taken it for a drive at the moment until I sort this problem out.
 
Does anyone have any suggestions?? I was thinking possible a dodgey sensor/plug/wire, or something not plugged in properly? Something that\'s hopefully an easy fix.
 
I\'m gonna check the level again in the morning. But it was full and wouldn\'t take anymore.
 
 
Any help appreciated!
 
Jim
hi
jim
 i had the same problem when i put mine in 2 weeks ago i can tell you now that the problem is down at the back of the power steering pump there is 2 connectors the same(ie) female and 2 connectors(ie)male swop these around mate they are abit difficult to see but they are there one is the coolant level sensor and the other another sensor for somewhere else dont quiet no what just swop these around it takes around 5-10 seconds to go off once correct so please be paitient:Talking1

fdracer

Quote from: Jim_rx7Ok....
 
I finally got the engine back together, in the car... all connected up and it started!! :)
 
Only thing is that the coolant buzzer and light seems to be on all the time?? We filled it up with a load of coolant. Then more, then more, then more. Must be near 7 litres or so.
 
It seems to be full and not taking anymore. The only thing is that the coolant buzzer/light seems to be on all the time.
 
I\'ve not taken it for a drive at the moment until I sort this problem out.
 
Does anyone have any suggestions?? I was thinking possible a dodgey sensor/plug/wire, or something not plugged in properly? Something that\'s hopefully an easy fix.
 
I\'m gonna check the level again in the morning. But it was full and wouldn\'t take anymore.
 
 
Any help appreciated!
 
Jim
hi
jim
 i had the same problem when i put mine in 2 weeks ago i can tell you now that the problem is down at the back of the power steering pump there is 2 connectors the same(ie) female and 2 connectors(ie)male swop these around mate they are abit difficult to see but they are there one is the coolant level sensor and the other another sensor for somewhere else dont quiet no what just swop these around it takes around 5-10 seconds to go off once correct so please be paitient:Talking1

Jim_rx7

Quote from: one2watchround that area its fairly easy to plug the wrong spade connectors into each other...
http://www.mazdarotaryclub.com/forums/showthread.php?p=260969#post260969


Ah...  that helped anyway mate. I know for defo the oil pressure sensor isn\'t plugged in properly now. The one that comes from the starter motor area should plug there.

So, I\'ll start with sorting that out and taking it from there.

Jim_rx7

Quote from: fdracerhi
jim
 i had the same problem when i put mine in 2 weeks ago i can tell you now that the problem is down at the back of the power steering pump there is 2 connectors the same(ie) female and 2 connectors(ie)male swop these around mate they are abit difficult to see but they are there one is the coolant level sensor and the other another sensor for somewhere else dont quiet no what just swop these around it takes around 5-10 seconds to go off once correct so please be paitient:Talking1


Cheers mate, I\'ll have a play after work.


iaint

Quote from: Jim_rx7Yeah, cheers mate. Will have a play after work and see what I can figure out.

Is the coolant sensor on the front of the filler neck where a little wire comes out? (not at the car at the moment).


That\'s the one.  Single wire to the sensor.  If the coolant is all the way to the top of the neck then the sensor is submerged and the warning shouldn\'t be going off - probably a loose connection or broken wire.

"The way to do is to be." - Lao Tzu

Jim_rx7

A couple of the wires are connected to the wrong things me think. Will sort it out this evening. :)

Jim_rx7

Sorted chaps... cheers for the help guys.

rx7veilside