Quick Fire Quiz

[t2rew]

need help NOW

1, the apexi pfc only goes up to 1500cc sec. i have 1600. will this be ok ?

2, does the pfc need a oil pressure reading to run?

3.in the pfc menu, it says that the clutch and neutral switches are off. do i NOT have to bridge these curcuits now?

4, in the curcuit diagram there is a EL unit. what does it do? and do i need it or can i bypass?

5,there is a multyplug near the coil ignighter. there is two wires a  red wire and a white wire going to it. what does it go to?

6,why is evey step forward followed with two steps back?

7 any one want an unfinished project?

[Gman]

Take some deep breaths, it will all be cool in the end i\'m sure!  Cant help on the PFC but if you need me to come and hold a flash light for you let me know!

[maximtaylor]

Some answers for you

1, the apexi pfc only goes up to 1500cc sec. i have 1600. will this be ok ?

Get hold of someone with Datalogit / FC Edit and a laptop and larger values can be put in.

2, does the pfc need a oil pressure reading to run?

Not to my knowledge.

3.in the pfc menu, it says that the clutch and neutral switches are off. do i NOT have to bridge these curcuits now?

This will affect your idle control and little else, can you not put them back on? Later FD\'s need neutral before the starter will engage though, possibly.

4, in the curcuit diagram there is a EL unit. what does it do? and do i need it or can i bypass?

What circuit diagram, main loom?

5,there is a multyplug near the coil ignighter. there is two wires a red wire and a white wire going to it. what does it go to?

Don\'t know, sorry

6,why is evey step forward followed with two steps back?

Because that would be too simple, and the challenge would not be the same.

7 any one want an unfinished project?

No, want to buy a year 2000 stock fd cheap?

Regards

Max

[iaint]

Originally posted by maximtaylor
7 any one want an unfinished project?

No, want to buy a year 2000 stock fd cheap?

Regards

Max

I\'ll give you 10,500 for it Max

Iain