PWR radiator over stock

[Hayward North]

Just perchased a PWR radiator from a guy over at FDUK and i cant belive how much thicker it is than the stock one .
Its dirty but will clean up gonna be installing it this weekend, will record water temps before and after on the same day and conditions hopfully.

[yamaster]

tis a lot biger allright.  a new rad is nect on my list. let us know how the temp differance i:Thumbs-up s

[Hayward North]

tis a lot biger allright.  a new rad is nect on my list. let us know how the temp differance i:Thumbs-up s

Dont worry i will as im so intrigued but the whole fasard of ally rads

[RobbieRX-7]

I fitted a koyo to mine and that was huge compared to the stocker. I also discovered it was a bit too thick. The a/c drier (the silver round cylinder by the passenger headlamp) was actually fouling the bonnet which meant it wouldn\'t close. Best thing to do is cut the corners off the radiator fan frames to allow easier fitment of the fans to the rad and also to allow the drier to sit lower.

[Hayward North]

Well fitted it today and what a struggle :2eek , had to take the rad out a few times as the small brackets at the side would not allow the rad to go completely down so leaving all the intercooler and ducting sticking up and unable to mount, but a few mods of the fan housing and brackets made for a tight but perfect fit.

Temps are a little lower at idle about 5c but thrashing it and the temps stay 12-15c lower and they are very constant.

Overall very pleased and even had the time to fully flush the cooling system with just water.

[yamaster]

Well fitted it today and what a struggle :2eek , had to take the rad out a few times as the small brackets at the side would not allow the rad to go completely down so leaving all the intercooler and ducting sticking up and unable to mount, but a few mods of the fan housing and brackets made for a tight but perfect fit.

Temps are a little lower at idle about 5c but thrashing it and the temps stay 12-15c lower and they are very constant.

Overall very pleased and even had the time to fully flush the cooling system with just water.

nice results. any pics of it fitted?

[Hayward North]

Ah well was gonna take some piccys of the installation and mods to make it fit correctly but didnt think there would be much interest so didnt take any

Ah well.

The rad when installed is vertually hidden as its standard mount and i have aircon fitted so its also behind the aircon condensor, guess removing the aircon would prove to lower temps even more.

Im intending on removing the aircon soon anyway so i will take some piccys of the rad then.