any idea what the problem is?

[yamaster]

my car is ideling at 1500 and it keeps cutting out when i come to a stop.

the cat heat sencor light comes on when its on idel or when im driving and lift of. as soon as i hit the trottle it goes of.

the car has the cat removed.  it is also poping alot more

here the comander pic does every thing look ok??

[ftorex]

Have you tried to adjust the TPS..

I think its not uncommon for the heat warning light to come on when decelarating (lifting off the throttle)..Its the PFC just showing high knock values during this time but its ok as far as i know..

Might need to be mapped correctly.

[yamaster]

Have you tried to adjust the TPS..

I think its not uncommon for the heat warning light to come on when decelarating (lifting off the throttle)..Its the PFC just showing high knock values during this time but its ok as far as i know..

Might need to be mapped correctly.

wats the TPS:spank

[ftorex]

TPS..Throttle position sensor....Small black connector on the throttle body...
Check the FSM for instructions on how to adjust it..2 small bolts to open and adjust carefully until you get the correct voltages on the PFC for closed throttle and WOT..
Hope that helps..

[yamaster]

TPS..Throttle position sensor....Small black connector on the throttle body...
Check the FSM for instructions on how to adjust it..2 small bolts to open and adjust carefully until you get the correct voltages on the PFC for closed throttle and WOT..
Hope that helps..

are u on irishrotary???

[yamaster]

got the problem fixed. it was a vacum pipe of the charge reliefe valve had came of. stuck it back on and is running great.:3gears-lh


thank god for another easy fix:god

[nikp]

You\'re commander is also flashing up the TPS being out of spec however. It\'s needs adjusting

[Carl]

You\'re commander is also flashing up the TPS being out of spec however. It\'s needs adjusting

It is fine,don\'t adjust it.
Regards
Carl

[nikp]

Oh.....ok.....me sorry!

(In my defense, i only looked at it being flagged in black, not the actual value. Have adjusted mine several times now, so i should have known better!!)