LS1 V8 fd conversion progress thread

Started by Spartacus, April 16, 2007, 07:10:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mar71n

All looking good. Just make sure the pinch bolt on the top clamp of the steering column doesn’t catch the headers. Makes for a interesting first test drive! Just ask Craig.

shaunwil

1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

mar71n

If any one has the white plug pictured above going spare I`m after one.

Spartacus

Quote from: mar71nAll looking good. Just make sure the pinch bolt on the top clamp of the steering column doesn’t catch the headers. Makes for a interesting first test drive! Just ask Craig.
Funny enough it did, but I reversed that joint to move the UJ a bit and it\'s fine.

Spartacus

Quote from: mar71nIf any one has the white plug pictured above going spare I`m after one.


If you mean the loom plug from the GTO? I will have once I\'ve cut off all I need. Have you got the plug to go into it then?

strange_days_uk

This is a quality thread.


..

and a great build

:Thumbs-up

Spartacus

Quote from: strange_days_ukThis is a quality thread.


..

and a great build

:Thumbs-up


Aww shuks i\'m red now........

tinker-27

its not that plug you need martin you need x14 from the mazda loom !!

Spartacus

Quote from: tinker-27its not that plug you need martin you need x14 from the mazda loom !!

I didn\'t go the X-14 route, I found it just as easy going from behind the dials.

antnicuk

looking good phil,   let me know if you need a hand moving the car,  i have a A frame towing dolley which i used to use to tow my rx7 to rotorstock.  I\'m Happy to help out.
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!


Spartacus

Quote from: antnicuklooking good phil,   let me know if you need a hand moving the car,  i have a A frame towing dolley which i used to use to tow my rx7 to rotorstock.  I\'m Happy to help out.


This man is a super hero:god  I\'m still hoping that I will be able to drive it away but if it comes to it I\'d be very grateful, cheers.

Spartacus

Very quick and short update from my phone, looks like all my wiring was ok after all. Can\'t stop, moving house soon and I\'d like to bring the car with me! So better get on and put some of it back together.

I had a few crossed fingers here.

antnicuk

superb,    well done matey,  excellent progress.
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!


Spartacus

Quote from: antnicuksuperb,    well done matey,  excellent progress.

Many thanks, I\'m not out of the woods yet. I need to put the car back together, MOT\'d etc etc all while packing up all our gear and arranging to move house. It\'s getting a bit like the old plate spinning on poles act.
I have considered not giving the new owners a key to the garage and waiting until they go to work so I could carry on working on the car.:rolleyes:

I may need your services yet:guinness

SmbFD3S

Nice one mate, lovely to hear her starting up :D
 
Hope all goes well with the move too :D
\'92 UK RX7 FD
\'97 Kwak ZX6R currently at Stage 3
\'86 Honda CRM250R stroker
\'11 BMW 320d ED