How to fit a HKS SSQV?

[fletch_]

the top hose that normally goes to the induction kit goes onto the back of the bov and the hole where it would normally goes just gets blocked up with anything,dont know what with mine just has a rubber cap glued onto it:Giggle
let me have a quick look and ill let you know about the vacume hose

[Jim_rx7]

cheers mate

[fletch_]

right, the vacume hose (blue) goes from the bov,under the intake pipe, and up to the plenum, indicated by the pink arrow,
the \'T\' piece is then run off to my boost guage.

 
heres one more pic of the whole set-up from a different angle
 

[Jim_rx7]

nice one mate... now I get it. Just need to get some sort of blanking thing to go on the induction kit.

[interloper393]

Use a bit of hose, a bolt and the clamp bud, pop the bolt in the hose and use the clamp to hold it in .. job done

[Jim_rx7]

lol... will do. Hopefully get it done tomorrow!

[<--rYaN-->]

If you get stuck theres another tutorial on this page i wrote a while back:

http://www.mazdarotaryclub.com/forums/showthread.php?t=13870&page=2&pp=15

[Jim_rx7]

Nah, I\'ll be alright.. fitted bovs before, just notto a rex.

So do you not remove the stock bovs on the rex, or do they just stay in place??

[interloper393]

you leave the one closest to the turbo`s on and remove the one at the front, just behind the drivers side headlight

[Jim_rx7]

so in a stock engine is there a stock bov roughly somewhere where the HKS one is in this piccy?

[interloper393]

Your near Ayr/kilmarnock arnt ya man? if you wanna pop down tomoz i`ll help you fir it bud im free all week lol

[Jim_rx7]

Nah mate... I\'m in Galashiels.... near Hawick, Selkirk, Jedburgh, Kelso etc etc. A wee bit away from Ayr!

[Jim_rx7]

It\'s fitted....

[interloper393]

does it sound nice lol.. only heard mine from the drive way as it aint registered

[Jim_rx7]

no because it\'s got a stupid purple insert in it. I want the proper high pitched SSQV sound!!!