How Much Do You Think The 20B FD Weighs

Started by antnicuk, March 05, 2007, 11:13:08 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

How Much Do You Think the 20 FD Weighs

200 - 1300 KG\'s
12 (21.1%)
301 - 1400 KG\'s
23 (40.4%)
401 - 1500 KG\'s
16 (28.1%)
501 or over
6 (10.5%)

Total Members Voted: 53

Print
Go Down Pages 1 2 3 4
User actions

antnicuk

#15
March 05, 2007, 12:31:03 PM
i\'ll give it a few more hours.........
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!

markrx7

#16
March 05, 2007, 01:25:55 PM
1380!

is my guess...

ace-rx7

#17
March 05, 2007, 01:32:13 PM
what was the tolerance of the weightbridge ? +- 10 or 20kg :xconfused
 
but i will guess at 1420kg if you have some ice in the back :D

FD3SNuttah

#18
March 05, 2007, 02:10:29 PM
i guess 1300kgs.

AndyGen3

#20
March 05, 2007, 02:19:32 PM
I voted 1501 or over..

Sure the standard 13B weighs nearly the same as a small block V8...

BlitzBoy

#21
March 05, 2007, 02:23:22 PM
Quote from: AndyGen3I voted 1501 or over..

Sure the standard 13B weighs nearly the same as a small block V8...
naaaaaa
 I managed to pick up and move a 13B (approx 75 kilos) a few inches, no chance with an old rover ali v8 i had
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Prof

#22
March 05, 2007, 02:25:41 PM
I\'d say just over 1401 Kg\'s - given that a stock FD with 13B-REW is between 1150-1300 depending on what\'s in the car  - you\'ve got an extra housing, more pipework for the exhaust (heavy) and for the throttle bodies, plus being a 20b you are going to need bigger tubby, bigger pipes, rad etc. - Plus there\'s more coolant in the engine - LOL.  That\'s my logic anyhoo - I\'d say 1435Kg\'s on the nose. :Thumbsup!
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex

AndyGen3

#23
March 05, 2007, 02:53:27 PM
Quote from: BlitzBoynaaaaaa
 I managed to pick up and move a 13B (approx 75 kilos) a few inches, no chance with an old rover ali v8 i had


Only coz of its size... If the V8 was compact like the 13B it wud be handy to lift too...

TwistedHumour

#24
March 05, 2007, 03:24:58 PM
I\'m going with 1342 :bandit
Never drive faster than your Guardian Angel can fly!

333rwhp @ 0.9 bar on the Twins :bandit

antnicuk

#25
March 05, 2007, 03:29:16 PM
can i just mention its a 3 rotor not a V8,  not sure where the V8 comes into it.
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!

antnicuk

#26
March 05, 2007, 04:28:43 PM
It weighed a HUGE  1530 KG\'s.......................
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!

sadgoth

#27
March 05, 2007, 04:39:12 PM
I\'m guessing that was with you in it eh? lol
Mark
89 Black FC3S Turbo II
1/2 Bridge port   Microtech LT10s   TII Conv Aluminium Bonnet & Leather seats   Koni Shocks Pi Springs   De-catted 3" exhaust  
GT4088 turbo   Walbro fuel pump   1000cc injectors   custom V-Mount   Blitz Boost Controller (ok so the boost controller is still to fit)

Loud? Hell yes! :D

Prof

#28
March 05, 2007, 04:40:28 PM
Quote from: antnicukIt weighed a HUGE 1530 KG\'s.......................

Still lighter than my topless tank! :driving :rollin
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex

Spartacus

#29
March 05, 2007, 04:46:13 PM
Quote from: antnicukIt weighed a HUGE  1530 KG\'s.......................

Now that is alot more than a V8 fd, how does it handle?
Print
Go Up Pages 1 2 3 4
User actions